AdapterId 077DFh


AdapterName "RAMBANK-II Memory Expansion Adapter    "


NumBytes 2


NamedItem

Prompt "Memory Size"

choice "2 banks,4 Meg"  pos[0]=0xxxxxxxb
choice "1 bank ,2 Meg"  pos[0]=1xxxxxxxb

Help

"Please use key F5 or F6 to change configurations. Either
 1 bank or 2 banks of memory chip can be installed or
 announced active on your RAMBANK-II, one bank contains
 18 chips organized as 2 Meg bytes memory. 1 Meg = 1024K."

NamedItem

Prompt "Starting Address for Memory on RAMBANK-II"

choice " 1M + 384K (size=4M)" pos[1]=01110100b mem 0160000h-055ffffh
choice " 3M + 384K (size=4M)" pos[1]=01100100b mem 0360000h-075ffffh
choice " 5M + 384K (size=4M)" pos[1]=01010100b mem 0560000h-095ffffh
choice " 7M + 384K (size=4M)" pos[1]=01000100b mem 0760000h-0B5ffffh
choice " 9M + 384K (size=4M)" pos[1]=00110100b mem 0960000h-0D5ffffh
choice "11M + 384K (size=4M)" pos[1]=00100100b mem 0B60000h-0F5ffffh
choice "13M + 384K (size=2M)" pos[1]=10010100b mem 0D60000h-0F5ffffh
choice " 1M + 384K (size=2M)" pos[1]=11110100b mem 0160000h-035ffffh
choice " 3M + 384K (size=2M)" pos[1]=11100100b mem 0360000h-055ffffh
choice " 5M + 384K (size=2M)" pos[1]=11010100b mem 0560000h-075ffffh
choice " 7M + 384K (size=2M)" pos[1]=11000100b mem 0760000h-095ffffh
choice " 9M + 384K (size=2M)" pos[1]=10110100b mem 0960000h-0B5ffffh
choice " 2M + 384K (size=4M)" pos[1]=01101100b mem 0260000h-065ffffh
choice " 2M + 384K (size=2M)" pos[1]=11101100b mem 0260000h-045ffffh
choice " 4M + 384K (size=4M)" pos[1]=01011100b mem 0460000h-085ffffh

Help

"Please use key F5 or F6 to change configurations.
 Starting Address is given to match the continuity of
 linear extended memory of system. The 1M (1024K) memory
 on system board has its ending address at ( 1M + 384K ),
 so the Starting Address of RAMBANK-II will be normally
 set at (1M + 384K) if there is no another add on memory
 installed. The Starting Address should be set to the
 ending address of additional memory, if there were   
 memory boards already iinstalled. For special        
 requirement of Starting Address not included in the
 choices, please run BANKSEV.exe to replace the default
 Adapter Description File. Please also note that the so
 called EMS memory does not contribute to the extended
 memory if they exist."