AdapterID 07DF1h

AdapterName "SYSGEN PSH200 SCSI Host Adapter"

NumBytes 3

FixedResources
        pos[0]=XXXXXX0Xb
        pos[1]=1XXXXXXXb 
        pos[2]=XXXXXXX1b
        pos[2]=XXXXXX1Xb
        pos[2]=XXX000XXb

NamedItem
        Prompt  "Adapter Memory Location"
          Choice "Segment CC00"
            pos[1]=XXXX0011b
            mem 0cc000h-0cffffh
          Choice "Segment C800"
            pos[1]=XXXX0010b
            mem 0c8000h-0cbfffh
          Choice "Segment D000"
            pos[1]=XXXX0100b
            mem 0d0000h-0d3fffh
          Choice "Segment D400"
            pos[1]=XXXX0101b
            mem 0d4000h-0d7fffh
          Choice "Segment D800"
            pos[1]=XXXX0110b
            mem 0d8000h-0dbfffh
          Choice "Segment DC00"
            pos[1]=XXXX0111b
            mem 0dc000h-0dffffh
          Choice "Memory Disabled"
            pos[1]=XXXX1XXXb
        Help
        "To configure this adapter you must choose the memory location the
         adapter will use for it's BIOS ROM.  There are six memory locations
         that can be selected.  Under normal circumstances, select <Segment
         C800>."

NamedItem
        Prompt "DMA Arbitration Level"
          Choice "Level 7" pos[0]=0111XXXXb arb 7
          Choice "Level 4" pos[0]=0100XXXXb arb 4
          Choice "Level 5" pos[0]=0101XXXXb arb 5
          Choice "Level 6" pos[0]=0110XXXXb arb 6
          Choice "Level 0" pos[0]=0000XXXXb arb 0
          Choice "Level 1" pos[0]=0001XXXXb arb 1
          Choice "Level 3" pos[0]=0011XXXXb arb 3
        Help
"This selects the DMA channel the adapter will use to
transfer data.
Use F5=Previous and F6=Next keys to change arbitration level for 
another channel if you are in the 'Change configuration' window.
Conflicting assignments are marked with an asterisk and
must be changed to use this adapter."

NamedItem
        Prompt "Interrupt Request Level"
          Choice "IRQ10" pos[2]=000XXXXXb int 10 
          Choice "IRQ11" pos[2]=001XXXXXb int 11 
          Choice "IRQ12" pos[2]=010XXXXXb int 12 
          Choice "IRQ15" pos[2]=011XXXXXb int 15 
          Choice "IRQ7"  pos[2]=100XXXXXb int 7 
   Help
"This selects the Interrupt Request level  the adapter will use."

NamedItem
	Prompt "I/O Address"
	  Choice "02A0h_02BFh" pos[0]=XXXX00XXb io 02A0h-02BFh
	  Choice "12A0h_12BFh" pos[0]=XXXX01XXb io 12A0h-12BFh
	  Choice "22A0h_22BFh" pos[0]=XXXX10XXb io 22A0h-22BFh
	  Choice "32A0h_32BFh" pos[0]=XXXX11XXb io 32A0h-32BFh
	Help
"Select 02A0h-02BFh for PSH200 SCSI host adapter. Use 
F5=Previous and F6=Next keys to change 
assignments if you are in the 'Change configuration' window.
Conflicting assignments are marked with an asterisk and
must be changed to use this adapter."

NamedItem
        Prompt "SCSI ID Selection"
          Choice "ID 7" pos[1]=X111XXXXb 
          Choice "ID 6" pos[1]=X110XXXXb 
          Choice "ID 5" pos[1]=X101XXXXb 
          Choice "ID 4" pos[1]=X100XXXXb 
          Choice "ID 3" pos[1]=X011XXXXb 
          Choice "ID 2" pos[1]=X010XXXXb 
          Choice "ID 1" pos[1]=X001XXXXb 
          Choice "ID 0" pos[1]=X000XXXXb 
        Help
"This selects the SCSI host adapter ID.
Use F5=Previous and F6=Next keys to change SCSI ID  
if you are in the 'Change configuration' window."