AdapterID 07FECh

AdapterName  "CSM Inc. SCSI Host Adapter"

NumBytes 2

nameditem
        Prompt  "Adapter I/O Location"
          Choice "0050h"
            pos[1]=0XXX0X00b
            io 0050h-005fh
          Choice "0110h"
            pos[1]=0XXX0X01b
            io 0110h-011fh
          Choice "0330h"
            pos[1]=0XXX0X10b
            io 0330h-033fh
          Choice "1000h"
            pos[1]=0XXX0X11b
            io 1000h-100fh
        Help
        "To configure this adapter you must choose the I/O location the
         adapter will use.  There are four I/O locations
         that can be selected.  Under normal circumstances, select
         <0050h>."

nameditem
        Prompt  "DMA Arbitration Level"
          Choice  "Level 6"
            pos[0]=X0110XXXb
            arb 6
          Choice  "Level 7"
            pos[0]=X0111XXXb
            arb 7
          Choice  "Level 8"
            pos[0]=X1000XXXb
            arb 8
          Choice  "Level 9"
            pos[0]=X1001XXXb
            arb 9
          Choice  "Level 10"
            pos[0]=X1010XXXb
            arb 10
          Choice  "Level 11"
            pos[0]=X1011XXXb
            arb 11
           Choice  "Level 12"
             pos[0]=X1100XXXb
             arb 12
           Choice  "Level 13"
             pos[0]=X1101XXXb
             arb 13
           Choice  "Level 14"
             pos[0]=X1110XXXb
             arb 14
           Choice  "Level 15"
             pos[0]=X1111XXXb
        Help
        "This selects the DMA channel the adapter will use to transfer data.
         Under normal circumstances, select <Level 6>."

nameditem
        Prompt  "DMA Burst"
          Choice "Disabled"
            pos[1]=XXXXX0XXb
          Choice "Enabled"
            pos[1]=XXXXX1XXb
        Help
        "To configure this adapter you must choose the DMA method.
         Under normal circumstances, select <Enabled>."

nameditem
        Prompt  "SCSI Parity Checking"
          Choice "Enabled"
            pos[1]=X1XXXXXXb
          Choice "Disabled"
            pos[1]=X0XXXXXXb
        Help
        "To configure this adapter you must choose to enable or disable SCSI
         bus parity checking. SCSI bus parity is always generated. The SCSI
         device must also be enabled to generate parity if parity checking is
         enabled."

nameditem
        Prompt  "Interrupt Level"
          Choice  "Level 5"
            pos[0]=XXXXX11Xb
            int 5
          Choice  "Level 10"
            pos[0]=XXXXX01Xb
            int 10
          Choice  "Level 11"
            pos[0]=XXXXX10Xb
            int 11
          Choice  "Level 14"
            pos[0]=XXXXX00Xb
            int 14
        Help
        "This selects the interrupt level the adapter will use to transfer
         data. Under normal circumstances, select <Level 5>."

nameditem
        Prompt  "Fairness On/Off"
          Choice  "On"
            pos[0]=1XXXXXXXb
          Choice  "Off"
            pos[0]=0XXXXXXXb
        Help
        "Bus Arbitration Fairness.  This controls whether the adapter will
         release control of the bus when it has been using it exclusively.
         Under normal circumstances, select <On>."