AdapterId 080FCh

AdapterName  "STB PowerGraph MC VGA Adapter"

NumBytes 4

FixedResources
		     pos[0]=XX11XXXXb
		     pos[1]=XXXXXXXXb
		     pos[2]=00000000b
		     pos[3]=11XXXXXXb

;
;   The IO addresses shown below are dummies to cause the Automatic
;   Configuration to assign unique (hopefuuly sequential) board numbers
;   to each board.
;
;   The board actually uses addresses 3C0-3DF just like a regular VGA.
;

NamedItem
   Prompt  "Board number"
      Choice "1" pos[0]=XXXX000Xb   pos[3]=XX010000b
		 io 03C0h-03C0h
		 mem 0C0000h-0C7F0Fh
 ;		  mem 0C2000h-0C23FFh
  ;		  mem 0C4000h-0C43FFh
   ;		  mem 0C6000h-0C63FFh
      Choice "2" pos[0]=XXXX001Xb   pos[3]=XX11XXXXb
		 io 03C1h-03C1h
		 mem 0C7F10h-0C7F1Fh
 ;		  mem 0C2400h-0C27FFh
  ;		  mem 0C4400h-0C47FFh
   ;		  mem 0C6400h-0C67FFh
      Choice "3" pos[0]=XXXX010Xb   pos[3]=XX11XXXXb
		 io 03C2h-03C2h
		 mem 0C7F20h-0C7F2Fh
 ;		  mem 0C2800h-0C2BFFh
  ;		  mem 0C4800h-0C4BFFh
   ;		  mem 0C6800h-0C6BFFh
      Choice "4" pos[0]=XXXX011Xb   pos[3]=XX11XXXXb
		 io 03C3h-03C3h
		 mem 0C7F30h-0C7F3Fh
 ;		  mem 0C2C00h-0C2FFFh
  ;		  mem 0C4C00h-0C4FFFh
   ;		  mem 0C6C00h-0C6FFFh
      Choice "5" pos[0]=XXXX100Xb   pos[3]=XX11XXXXb
		 io 03C4h-03C4h
		 mem 0C7F40h-0C7F4Fh
 ;		  mem 0C3000h-0C33FFh
  ;		  mem 0C5000h-0C53FFh
   ;		  mem 0C7000h-0C73FFh
      Choice "6" pos[0]=XXXX101Xb   pos[3]=XX11XXXXb
		 io 03C5h-03C5h
		 mem 0C7F50h-0C7F5Fh
 ;		  mem 0C3400h-0C37FFh
  ;		  mem 0C5400h-0C57FFh
   ;		  mem 0C7400h-0C77FFh
      Choice "7" pos[0]=XXXX110Xb   pos[3]=XX11XXXXb
		 io 03C6h-03C6h
		 mem 0C7F60h-0C7F6Fh
 ;		  mem 0C3800h-0C3BFFh
  ;		  mem 0C5800h-0C5BFFh
   ;		  mem 0C7800h-0C7BFFh
      Choice "8" pos[0]=XXXX111Xb   pos[3]=XX11XXXXb
		 io 03C7h-03C7h
		 mem 0C7F70h-0C7FFFh
 ;		  mem 0C3C00h-0C3FFFh
  ;		  mem 0C5C00h-0C5FFFh
   ;		  mem 0C7C00h-0C7FFFh

   Help
      "This allows support for multiple boards to be installed
      in your system.  Each STB video board must have a unique
      board number assigned to it.  Board numbers must be assigned
      sequentially starting at BOARD 1.  The Video BIOS for all
      boards is accessed only from BOARD 1."


NamedItem
   Prompt  "Clock frequency group select"
      Choice "Normal   " pos[0]=01XXXXXXb
      Choice "Ergonomic" pos[0]=10XXXXXXb

   Help
      "Selects one of two possible video frequency sets, Normal
      for most monitors, Ergonomic for high refresh ergonomic
      monitors ( *** Danger ---> Ergonomic frequencies can do
      permanent damage to some monitors. Consult manual. *** )"