AdapterID 08EFDh

AdapterName  "SCSI Cached Disk/Diskette Controller (ID = 8EFD)"

NumBytes 5

fixedresources
	pos[3]=xx1xxxxxb
	pos[2]=1X1000xXb
	pos[1]=XXXXXXXXb
	pos[0]=xxxxXXXXb
	int 0eh
BEGIN
NoDMA
nameditem
       Prompt  "SCSI Adapter Memory Location"
	 Choice "Segment C000"
	   pos[0]=0000XXXXb
	   pos[2]=XXXXXX1Xb
	   mem 0c0000h-0c7fffh
	 Choice "Segment C400"
	   pos[0]=0010XXXXb
	   pos[2]=XXXXXX1Xb
	   mem 0c4000h-0cbfffh
	 Choice "Segment C800"
	   pos[0]=0100XXXXb
	   pos[2]=XXXXXX1Xb
	   mem 0c8000h-0cffffh
	 Choice "Segment CC00"
	   pos[0]=0110XXXXb
	   pos[2]=XXXXXX1Xb
	   mem 0cc000h-0d3fffh
	 Choice "Segment D000"
	   pos[0]=1000XXXXb
	   pos[2]=XXXXXX1Xb
	   mem 0d0000h-0d7fffh
	 Choice "Segment D400"
	   pos[0]=1010XXXXb
	   pos[2]=XXXXXX1Xb
	   mem 0d4000h-0dbfffh
	 Choice "Segment D800"
	   pos[0]=1100XXXXb
	   pos[2]=XXXXXX1Xb
	   mem 0d8000h-0dffffh
	 Choice "ROM Disabled"
	   pos[2]=XXXXXX01b
       Help
       "This option selects a 32kb memory block which this adapter will use
	for it's BIOS ROM.  There are five memory ranges that can be selected.
	The automatic
	configuration program will assign a ROM space it considers has no
	conflicts with other adapters. This
	assignment can be manually changed by selecting 'Change Configuration'
	and then using the F5=previous and the F6=Next keys to select another
	address range choice, provided there is no conflict."

nameditem
	Prompt "SCSI I/O Address"
	  Choice  "3540-3547"  pos[0]=XXXX000Xb io 3540h-3547h
	  Choice  "3548-354F"  pos[0]=XXXX001Xb io 3548h-354Fh
	  Choice  "3550-3557"  pos[0]=XXXX010Xb io 3550h-3557h
	  Choice  "3558-355F"  pos[0]=XXXX011Xb io 3558h-355Fh
	  Choice  "3560-3567"  pos[0]=XXXX100Xb io 3560h-3567h
	  Choice  "3568-356F"  pos[0]=XXXX101Xb io 3568h-356Fh
	  Choice  "3570-3577"  pos[0]=XXXX110Xb io 3570h-3577h
	  Choice  "3578-357F"  pos[0]=XXXX111Xb io 3578h-357Fh

	Help
	"This allows the user to choose the I/O address for each adapter"

nameditem
	Prompt	"SCSI Arbitration Level"
	  Choice  "Level C"  pos[1]=XXXX1100b  arb 12
	  Choice  "Level D"  pos[1]=XXXX1101b  arb 13
	  Choice  "Level E"  pos[1]=XXXX1110b  arb 14
	  Choice  "Level 1"  pos[1]=XXXX0001b  arb 1
	  Choice  "Level 3"  pos[1]=XXXX0011b  arb 3
	  Choice  "Level 5"  pos[1]=XXXX0101b  arb 5
	  Choice  "Level 6"  pos[1]=XXXX0110b  arb 6
	  Choice  "Level 8"  pos[1]=XXXX1000b  arb 8
	  Choice  "Level 9"  pos[1]=XXXX1001b  arb 9
	  Choice  "Level A"  pos[1]=XXXX1010b  arb 10
	  Choice  "Level B"  pos[1]=XXXX1011b  arb 11


	Help
	"This selects the arbitration level that SCSI will use to transfer data.
	 Under normal circumstances, select <Level 12>."

nameditem
	Prompt	"SCSI Adapter Fairness On/Off"
	  Choice  "On"            pos[1]=XXX1XXXXb
	  Choice  "Off"           pos[1]=XXX0XXXXb

	Help
	"Bus Arbitration Fairness.  This controls whether the adapter will
	 release control of the bus when it has been using it exclusively.
	 Under normal circumstances, select <On>."

nameditem
	Prompt	"ROM Wait State Disable"
	  Choice  "Enable Wait State"     pos[2]=XXXXXXX0b
	  Choice  "No Wait State"         pos[2]=XXXXXXX1b

	Help
	"Enable/Disable ROM Wait State"

nameditem
	Prompt	"SCSI Adapter Address (ID)"
	  Choice "7"    pos[1]=111XXXXXb
	  Choice "6"    pos[1]=110XXXXXb
	  Choice "5"    pos[1]=101XXXXXb
	  Choice "4"    pos[1]=100XXXXXb
	  Choice "3"    pos[1]=011XXXXXb
	  Choice "2"    pos[1]=010XXXXXb
	  Choice "1"    pos[1]=001XXXXXb
	  Choice "0"    pos[1]=000XXXXXb

	Help
	"This allows you to change the SCSI ID of the adapter.
	 Under normal circumstances, select <7>."

nameditem
	Prompt	"Address Burst Boundary"
	  Choice "No Boundary"            pos[2]=XXXX00XXb
	  Choice "32-Byte Boundary"       pos[2]=XXXX01XXb
	  Choice "64-Byte Boundary"       pos[2]=XXXX10XXb
	  Choice "128-Byte Boundary"      pos[2]=XXXX11XXb
	Help
	"Determines the maximum number of bytes per burst"
END

BEGIN
nameditem
	Prompt	"Diskette DMA Arbitration Level"
	  Choice  "Shared level 2 only"  pos[4]=XXXX1101b  ARB SharedArb 2
	Help
	"This selects the DMA channel the diskette adapter will use to transfer data.
	 data.	Under normal circumstances, select <Level 2>."

nameditem
	Prompt	"Diskette Adapter Fairness On/Off"
	  Choice  "Off"            pos[4]=XXX0XXXXb
	  Choice  "On"             pos[4]=XXX1XXXXb
	Help
	"Bus Arbitration Fairness.  This controls whether the diskette adapter
	 will release control of the bus when it has been using it exclusively.
	 Under normal circumstances, select <Off>."

nameditem
	Prompt	"Diskette Primary/Alternate Addresses"
	  Choice  "Primary 03F0-03F7"    pos[4]=xx0xxxxxb io 03F0h-03f7h int 6
	  Choice  "Alternate 0370-0377"  pos[4]=xx1xxxxxb io 0370h-0377h int 6
	Help
	"This selects the primary or secondary address range of the
	 diskette portion of the adapter card."
END