; ; Version: 1.0 ; (C) Copyright International Business Machines Corporation 1994 ; All Rights Reserved ; ; AdapterId 08FABh AdapterName "IBM Dual EtherStreamer MC32 Adapter" NumBytes 4 FixedResources POS[0]=1xxxxxxxb POS[1]=00xx0000b POS[2]=11xx0xx1b Begin NoDMA NamedItem Prompt "System Interrupt Level" Choice "Interrupt 3" POS[1]=xx01xxxxb Int 03h Choice "Interrupt 2" POS[1]=xx00xxxxb Int 02h Choice "Interrupt 10" POS[1]=xx10xxxxb Int 0Ah Choice "Interrupt 11" POS[1]=xx11xxxxb Int 0Bh Help "This option allows you to select the interrupt level that the adapter will use to interrupt the system unit. The preferred interrupt level is 3, but the adapter can operate on any of the four levels if necessary. The assignment for this interrupt level can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=Previous and the F6=Next keys. If an assignment has an asterisk (*) by it, it is in conflict with another assignment and may need to be changed. NOTE...If multiple EtherStreamer adapters are present in the system, they must all be set to the same interrupt level." NamedItem Prompt "Micro Channel I/O Address" Choice "1C00-1CFF & 2000-20FF" POS[0]=x000111xb IO 01C00h-01CFFh 02000h-020FFh Choice "2000-20FF & 2400-24FF" POS[0]=x001000xb IO 02000h-020FFh 02400h-024FFh Choice "2400-24FF & 2800-28FF" POS[0]=x001001xb IO 02400h-024FFh 02800h-028FFh Choice "2800-28FF & 2C00-2CFF" POS[0]=x001010xb IO 02800h-028FFh 02C00h-02CFFh Choice "2C00-2CFF & 3000-30FF" POS[0]=x001011xb IO 02C00h-02CFFh 03000h-030FFh Choice "3000-30FF & 3400-34FF" POS[0]=x001100xb IO 03000h-030FFh 03400h-034FFh Choice "3400-34FF & 3800-38FF" POS[0]=x001101xb IO 03400h-034FFh 03800h-038FFh Choice "3800-38FF & 3C00-3CFF" POS[0]=x001110xb IO 03800h-038FFh 03C00h-03CFFh Choice "3C00-3CFF & 4000-40FF" POS[0]=x001111xb IO 03C00h-03CFFh 04000h-040FFh Choice "4000-40FF & 4400-44FF" POS[0]=x010000xb IO 04000h-040FFh 04400h-044FFh Choice "4400-44FF & 4800-48FF" POS[0]=x010001xb IO 04400h-044FFh 04800h-048FFh Choice "4800-48FF & 4C00-4CFF" POS[0]=x010010xb IO 04800h-048FFh 04C00h-04CFFh Choice "4C00-4CFF & 5000-50FF" POS[0]=x010011xb IO 04C00h-04CFFh 05000h-050FFh Choice "5000-50FF & 5400-54FF" POS[0]=x010100xb IO 05000h-050FFh 05400h-054FFh Choice "5400-54FF & 5800-58FF" POS[0]=x010101xb IO 05400h-054FFh 05800h-058FFh Choice "5800-58FF & 5C00-5CFF" POS[0]=x010110xb IO 05800h-058FFh 05C00h-05CFFh Choice "5C00-5CFF & 6000-60FF" POS[0]=x010111xb IO 05C00h-05CFFh 06000h-060FFh Choice "6000-60FF & 6400-64FF" POS[0]=x011000xb IO 06000h-060FFh 06400h-064FFh Choice "6400-64FF & 6800-68FF" POS[0]=x011001xb IO 06400h-064FFh 06800h-068FFh Choice "6800-68FF & 6C00-6CFF" POS[0]=x011010xb IO 06800h-068FFh 06C00h-06CFFh Choice "6C00-6CFF & 7000-70FF" POS[0]=x011011xb IO 06C00h-06CFFh 07000h-070FFh Choice "7000-70FF & 7400-74FF" POS[0]=x011100xb IO 07000h-070FFh 07400h-074FFh Choice "7400-74FF & 7800-78FF" POS[0]=x011101xb IO 07400h-074FFh 07800h-078FFh Choice "7800-78FF & 7C00-7CFF" POS[0]=x011110xb IO 07800h-078FFh 07C00h-07CFFh Choice "7C00-7CFF & 8000-80FF" POS[0]=x011111xb IO 07C00h-07CFFh 08000h-080FFh Choice "8000-80FF & 8400-84FF" POS[0]=x100000xb IO 08000h-080FFh 08400h-084FFh Choice "8400-84FF & 8800-88FF" POS[0]=x100001xb IO 08400h-084FFh 08800h-088FFh Choice "8800-88FF & 8C00-8CFF" POS[0]=x100010xb IO 08800h-088FFh 08C00h-08CFFh Choice "8C00-8CFF & 9000-90FF" POS[0]=x100011xb IO 08C00h-08CFFh 09000h-090FFh Choice "9000-90FF & 9400-94FF" POS[0]=x100100xb IO 09000h-090FFh 09400h-094FFh Choice "9400-94FF & 9800-98FF" POS[0]=x100101xb IO 09400h-094FFh 09800h-098FFh Choice "9800-98FF & 9C00-9CFF" POS[0]=x100110xb IO 09800h-098FFh 09C00h-09CFFh Choice "9C00-9CFF & A000-A0FF" POS[0]=x100111xb IO 09C00h-09CFFh 0A000h-0A0FFh Choice "A000-A0FF & A400-A4FF" POS[0]=x101000xb IO 0A000h-0A0FFh 0A400h-0A4FFh Choice "A400-A4FF & A800-A8FF" POS[0]=x101001xb IO 0A400h-0A4FFh 0A800h-0A8FFh Choice "A800-A8FF & AC00-ACFF" POS[0]=x101010xb IO 0A800h-0A8FFh 0AC00h-0ACFFh Help "This option allows you to select the micro channel I/O address range of the adapter. This Dual EtherStreamer adapter utilizes two 256 byte regions on 1024 byte boundaries. For micro channel I/O cycles, this adapter is selected when the micro channel I/O address is within its respective 256 byte region. If more than one adapter is used in your computer, each adapter must be assigned separate I/O address ranges. The assignment for the I/O address range can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=PREVIOUS and the F6=NEXT keys. If an assignment has an asterisk (*) by it, it is in conflict with another assignment and the I/O address range must be changed. If a conflict continues to exist, you may need to change the assignments for other options that are in your computer to resolve the conflict." NamedItem Prompt "Streaming Data Select" Choice "Enabled" POS[3]=xx1xxxxxb Choice "Disabled" POS[3]=xx0xxxxxb Help "This Dual EtherStreamer adapter can operate with or without Data Streaming. For best performance, select . This selection can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=Previous and the F6=Next keys." NamedItem Prompt "Fairness" Choice "Fairness ON " POS[3]=xxx0xxxxb Choice "Fairness OFF" POS[3]=xxx1xxxxb Help "Bus Arbitration Fairness controls whether the adapter will share the bus equitably with other devices or retain control of the bus as needed. Under normal circumstances, select . The assignment for fairness can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=Previous and the F6=Next keys." NamedItem Prompt "Arbitration Level" Choice "Level 8 & 9" POS[3]=xxxx1000b arb 8 9 Choice "Level 9 & A" POS[3]=xxxx1001b arb 9 10 Choice "Level A & B" POS[3]=xxxx1010b arb 10 11 Choice "Level B & C" POS[3]=xxxx1011b arb 11 12 Choice "Level C & D" POS[3]=xxxx1100b arb 12 13 Choice "Level D & E" POS[3]=xxxx1101b arb 13 14 Choice "Level E & 1" POS[3]=xxxx1110b arb 14 1 Choice "Level 1 & 2" POS[3]=xxxx0001b arb 1 2 Choice "Level 2 & 3" POS[3]=xxxx0010b arb 2 3 Choice "Level 3 & 5" POS[3]=xxxx0011b arb 3 5 Choice "Level 5 & 6" POS[3]=xxxx0101b arb 5 6 Choice "Level 6 & 7" POS[3]=xxxx0110b arb 6 7 Choice "Level 7 & 8" POS[3]=xxxx0111b arb 7 8 Help "This Dual EtherStreamer adapter utilizes 2 arbitration levels. If more than one adapter is used in your computer, each adapter must be assigned separate arbitration levels. Assignment for the arbitration level can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=Previous and the F6=Next keys. If an assignment has an asterisk (*) by it, it is in conflict with another assignment and the arbitration level must be changed. If a conflict continues to exist, you may need to change the assignments for other adapters or options that are in your computer to resolve the conflict." NamedItem Prompt "Parity Enable/Monitor Feedback" Choice "Parity OFF/Monitor OFF" pos[2]=xxxxx00xb Choice "Parity ON /Monitor OFF" pos[2]=xxxxx10xb Choice "Parity OFF/Monitor ON " pos[2]=xxxxx01xb Choice "Parity ON /Monitor ON " pos[2]=xxxxx11xb Help "Micro Channel Parity Enable/Monitor Slave devices feedback signal: This Ethernet Network adapter provides the capability of generating and checking data and address parity. In addition, this adapter also provides the capability of monitoring slave device's Selected Feedback Return Exception signals during DMA operations. These assignments can be changed by selecting 'CHANGE CONFIGURATION' and then using the F5=Previous and the F6=Next keys." End