AdapterID 0E014h

AdapterName  "S/370 Channel Emulator Adapter/A"

NumBytes 4

NamedItem
  Prompt  "Control Interface Location"
    Choice "C0000 (8K)"
    pos[1]=00001100b
    pos[3]=xxxx000xb mem 0C0000h-0C1FFFh

    Choice "C2000 (8K)"
    pos[1]=00001100b
    pos[3]=xxxx001xb mem 0C2000h-0C3FFFh

    Choice "C4000 (8K)"
    pos[1]=00001100b
    pos[3]=xxxx010xb mem 0C4000h-0C5FFFh

    Choice "C6000 (8K)"
    pos[1]=00001100b
    pos[3]=xxxx011xb mem 0C6000h-0C7FFFh

    Choice "C8000 (8K)"
    pos[1]=00001100b
    pos[3]=xxxx100xb mem 0C8000h-0C9FFFh

    Choice "CA000 (8K)"
    pos[1]=00001100b
    pos[3]=xxxx101xb mem 0CA000h-0CBFFFh

    Choice "CC000 (8K)"
    pos[1]=00001100b
    pos[3]=xxxx110xb mem 0CC000h-0CDFFFh

    Choice "CE000 (8K)"
    pos[1]=00001100b
    pos[3]=xxxx111xb mem 0CE000h-0CFFFFh

    Choice "D0000 (8K)"
    pos[1]=00001101b
    pos[3]=xxxx000xb mem 0D0000h-0D1FFFh

    Choice "D2000 (8K)"
    pos[1]=00001101b
    pos[3]=xxxx001xb mem 0D2000h-0D3FFFh

    Choice "D4000 (8K)"
    pos[1]=00001101b
    pos[3]=xxxx010xb mem 0D4000h-0D5FFFh

    Choice "D6000 (8K)"
    pos[1]=00001101b
    pos[3]=xxxx011xb mem 0D6000h-0D7FFFh

    Choice "D8000 (8K)"
    pos[1]=00001101b
    pos[3]=xxxx100xb mem 0D8000h-0D9FFFh

    Choice "DA000 (8K)"
    pos[1]=00001101b
    pos[3]=xxxx101xb mem 0DA000h-0DBFFFh

    Choice "DC000 (8K)"
    pos[1]=00001101b
    pos[3]=xxxx110xb mem 0DC000h-0DDFFFh

    Choice "DE000 (8K)"
    pos[1]=00001101b
    pos[3]=xxxx111xb mem 0DE000h-0DFFFFh

  Help
    "This is the memory location to be used for the adapter
     Control Interface.  The Control Interface occupies 8K.
     The choices provide Control Interface mappings below
     the 1 megabyte boundary."

NamedItem
  Prompt  "I/O Buffer Location"
    Choice "C0000 (64K)"
    pos[0]=xxxxx1xxb
    pos[2]=00001100b
    pos[3]=xxxxxxx0b mem 0C0000h-0CFFFFh

    Choice "D0000 (64K)"
    pos[0]=xxxxx1xxb
    pos[2]=00001101b
    pos[3]=xxxxxxx0b mem 0D0000h-0DFFFFh

    Choice "C0000 (32K)"
    pos[0]=xxxxx0xxb
    pos[2]=00001100b
    pos[3]=xxxxxxx0b mem 0C0000h-0C7FFFh

    Choice "C8000 (32K)"
    pos[0]=xxxxx0xxb
    pos[2]=00001100b
    pos[3]=xxxxxxx1b mem 0C8000h-0CFFFFh

    Choice "D0000 (32K)"
    pos[0]=xxxxx0xxb
    pos[2]=00001101b
    pos[3]=xxxxxxx0b mem 0D0000h-0D7FFFh

    Choice "D8000 (32K)"
    pos[0]=xxxxx0xxb
    pos[2]=00001101b
    pos[3]=xxxxxxx1b mem 0D8000h-0DFFFFh

    Choice "PROGRAMMED 64K > 1M"
    pos[0]=xxxxxxxxb
    pos[2]=xxxxxxxxb
    pos[3]=xxxxxxxxb EXEC

  Help
    "This is the memory location to be used for the adapter
     I/O Buffer.  The I/O buffer occupies either 32K or 64K bytes.
     The manual choices provide I/O Buffer mappings (both 32K and
     64K sizes) below the 1 megabyte boundary.  The PROGRAMMED
     choice provides a 64K I/O Buffer mapping above the 1 megabyte
     boundary."

NamedItem
  Prompt  "I/O Interrupt Level"
    Choice "Interrupt level 10 (decimal)"  pos[0]=xxxxxx0xb  int 10
    Choice "Interrupt level 12 (decimal)"  pos[0]=xxxxxx1xb  int 12

  Help
    "This is the interrupt level which the adapter will use.
     The interrupt level may be shared with other adapters.
     Performance may be degraded if the interrupt level is
     heavily used by other adapters."

NamedItem
  Prompt  "Wait States"
    Choice "Wait States: 1 Read, 0 Write"  pos[0]=xxx01xxxb

  Help
    "These are the wait states included when the Micro Channel
     reads or writes the I/O buffer.  For correct operation
     the adapter must be set to 1 wait for I/O buffer reads and
     no waits for I/O buffer writes."