Thanks for all the replies that I recieved for my earlier messages about
the digitizing tables, but I still cannot get them to work.
The problem - We are trying to set up two digitizing tables (Altek
AC-30's) as network devices. We have LAT running and the devices mapped
to a port on a Decserver. They are connected to a Decserver300 for
which from our Alpha (3000-300LX) we can see using 'latcp -dS' that a
connection has been made.
The software we are running is ARC/INFO 6.1.2 and there is a component
that runs a test on the digitizing device which will find the device but
then just hangs.
We had earlier attempted to connect to a Decserver200 and we were
not quite 100% successful (but we made it further through the digitizer
test). We have the same settings on the DS300 as were set on the DS200.
Is there a big difference in capcability between the two types of
Decservers? Is what I am trying being done elsewhere? We do have printers
working successfully as LAT devices.
Any help would be appreciated! Thanks.
Daniel Swim
Nova Scotia Department
of Agriculture and Marketing
Plant Industry Branch
Truro, Nova Scotia, Canada
DS_at_GUSWS.nsac.ns.ca
Received on Tue Feb 14 1995 - 07:32:01 NZDT