Hi,
I was trying to set up a modem on DEC Alpha 3000/300 OSF/1 3.0B, using
the methods discussed in this list. When dialing from a PC, it gets
connected but nothing else happens, no login prompt or anything. What
am I missing? Here's what I did:
. Edit /etc/gettydefs to include line
dialin# B38400 HUPCL CS8 # B38400 HUPCL CS8 #login: #dialin
. Edit /etc/inittab to include line
dialin:23:respawn:/usr/sbin/getty -h /dev/tty00 dialin vt100
. Set the modem (Hayes, V.32bis) on a PC and save the settings:
Auto Answer, Hardware Flow Control, 14,400-8-N-1,
MNP5 and V.42bis compression, Auto-reliable
. Run 'init q' to restart init
. Dial from a PC. It says 'connected'. The RD flashes for a while
and then goes out. No login prompt is displayed.
Thank you.
---
Yizhong Zhou
University of Southern Maine
zhou_at_usmcs.maine.edu
Received on Thu Mar 16 1995 - 08:54:30 NZDT