RGB monitor for AlphaServer 2100

From: Craig Morgan <C.Morgan_at_soc.staffs.ac.uk>
Date: Tue, 15 Aug 1995 14:48:52 +0000

Hi all,
        Can anyone help ...

        We have an AlphaServer 2100 purchased with a 14inch Digital monitor
(purchased against our advice, the monitor that is!). The monitor is
non-interlaced but quite a poor picture, and to cap it all it has developed
a fault in the horizontal positioning which will necessitate replacement.

        We also have a 17inch (about 15inch visible size) Trinitron (again
Digital badged) which is currently residing on an old DECstation, montior
model number VR297-D3. Does anybody know if this can be driven by the
QVision controller in the AlphaServer and if so what kind of contortions
must I go through. I know I'll have to get new leads (ie. 15 pin VGA/SVGA
-> 3 x RGB BNC's), but will the monitor sync OK.

        Any advice or help appreciated, I'll summarise anything useful to
the list!!

--
Craig
                                   ,,,   Wot, NO mountains!
                                  (o o)
 =============================oOO==(_)==OOo============================
  Craig Morgan                       Lecturer, CS Group
  School of Computing                Email: C.Morgan_at_soc.staffs.ac.uk
  Staffordshire University           Phone: +44 (0)1785 353466
  Beaconside                         Fax:   +44 (0)1785 353497
  Stafford, UK  ST18 0DG             Pager: +44 (0)839 453754
  "It's the downhill thrills, that make the uphill slog worthwhile..."
 ======================================================================

Received on Tue Aug 15 1995 - 16:10:27 NZST