Hello,
My original messages was:
> I have one of those DEC2000/300 machine that is running OSF1 3.2. There are
> two internal drives in the machine and they work great. On the same bus, I
> attached an external drive. I am able to see the drive and create UFS and
> mount it. I have no problem of copying some files to it. The problem happens
> when I try to copy many files to it. For example, untaring some files.
>
> The drive hangs when heavy IO takes place on the drive. I attached the same
> drive on another machine and it works fine. Additionally, I replaced the SCSI
> card and same problem occures on the second card.
>
> Does any one experienced this problem? Any suggestions?
Thanks to many people for the suggestions. The problem was the cable I was
using. It's too long. Instead of a 5 feet cable, I used a 2 feet cable.
Everything works great.
Again, many thanks to the folks out there.
John
--------------------------------------------------------------
John Li o o
Printrak International In. V
~
e-mail: jli_at_printrak.com phone: (714) 666-2700 ext 2247
--------------------------------------------------------------
Received on Tue Sep 05 1995 - 20:14:58 NZST