Hello Managers,
I have inherited DEC 3000 M600 running DU 3.2c, one of the disks is
configured as such :-
disklabel -r rz2
# /dev/rrz2a:
type: SCSI
disk: rz26l
label:
flags:
bytes/sector: 512
sectors/track: 57
tracks/cylinder: 14
sectors/cylinder: 798
cylinders: 2570
sectors/unit: 2050860
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize cpg]
a: 131072 0 ADVfs # (Cyl. 0 -
164*)
b: 327680 131072 unused 1024 8192 # (Cyl. 164*-
574*)
c: 2050860 0 unused 1024 8192 # (Cyl. 0 -
2569)
d: 327680 131072 unused 1024 8192 # (Cyl. 164*-
574*)
e: 327680 131072 unused 1024 8192 # (Cyl. 164*-
574*)
f: 327680 131072 unused 1024 8192 # (Cyl. 164*-
574*)
g: 1592108 458752 ADVfs # (Cyl. 574*-
2569*)
h: 327680 131072 unused 1024 8192 # (Cyl. 164*-
574*)
#
/ is mounted on rz2a, rz2b is 160M of swap and /var is mounted on rz2g.
I would like to leave the root and swap partitions as they are, reduce
the size of the /var partition to around 200M and use the remainder of
the disk for a new /home filesystem.
Any advice on how to acheive this would be greatly appreicated.
P.S. What is the 'offset' ?
I will summarise.
Phil.
--
--------------------------------------------------------------------
| Philip Sloan | Email: philip.sloan_at_shorts.co.uk |
| Network Controller | Phone: 44 1232 462949 |
| Short Brothers PLC | Fax : 44 1232 733535 |
--------------------------------------------------------------------
Received on Wed Jan 17 1996 - 20:14:38 NZDT