Looks like we have, in part at least, a question of 'Ask a stupid
question...'. Lack of sleep, limited knowledge of SCSI, and solar flares
led me to attempt to work magic with LUNs when I'm limited to LUN 0, and
well .. It don't work that way...
In short, use SCSI IDs 0 through 6, and let 7 alone because it's
typically reserved for the controller.
Another suggestion I received was that firmware revision 007 could be
upgraded to 14 on the RZ29s.
Thanks to the following for taking the time to point out a stupid
mistake on my part:
Stan Huhman#HUHMANJohn Deere EW <huhman_at_rg.deere.com>
alan_at_nabeth.cxo.dec.com
Michael Matthews <matthewm_at_sgate.com>
The only other question I have is whether or not I need to set up power
and or drive termination on any of the ST15150Ns. I've seen problems with
SCI CAM errors on similar setups, and think it might be traced to this.
The SCSI IDs work perfectly now that I'm not doing stupid things with ID
7, by the way.
Thanks again,
Jason Heyd
heyd_at_lycos.com
On Thu, 18 Apr 1996, Jason M. Heyd <heyd_at_lycos.com> wrote:
> > Greetings all,
> >
> > I've got 4 Barracuda ST15150N drives that I'd like to connect to a 400
> > 4/233. I've already got an RZ28M as SCSI device 0, and 3 RZ29Bs in a
> > StorageWorks BA353-Ax Desktop Expansion Unit as devices 1, 2 and 3.
> > Basically I need to know what jumpers to set on these 4 'cudas such
> > that they're SCSI devices 4, 5, 6 and 7. (They're going to reside in an
> > external enclosure by the way.)
> > The setup I have now, obviously wrong somewhere, gives me the following:
> >
> > >>>show dev
> > dka0.0.0.6.0 DKA0 RZ28M 0568
> > dka101.1.0.6.0 DKA101 RZ29B 0007
> > dka2.0.0.6.0 DKA2 SEAGATE ST15150N 0022
> > dka202.2.0.6.0 DKA202 RZ29B 0007
> > dka301.3.0.6.0 DKA301 RZ29B 0007
> > dka302.3.0.6.0 DKA302 SEAGATE ST15150N 0022
> > dka500.5.0.6.0 DKA500 SEAGATE ST15150N 0022
> > dka502.5.0.6.0 DKA502 SEAGATE ST15150N 0022
> > dka604.6.0.6.0 DKA604 SEAGATE ST15150N 0022
> > dva0.0.0.0.1 DVA0
> > ewa0.0.0.11.0 EWA0 08-00-2B-E6-4C-0F
> > pka0.7.0.6.0 PKA0 SCSI Bus ID 7
> >
> > I'll summarize, and thanks in advance!
> >
> > Jason Heyd
> > heyd_at_lycos.com
> >
>
Received on Thu Apr 18 1996 - 22:46:52 NZST