DecSafe cluster hangs/crashes

From: <lbro_at_dscc.dk>
Date: Thu, 01 May 97 10:58:03 wet

     Hi, folks
     
     I am running a DECSafe cluster with two 4100 and one 2100. There are
     two shared FWD SCSI buses with each one SW300 StorageWorks cabinet on
     them.
     
     I run an NFS service and an Ingres service.
     Everything works fine.
     
     Until after a few hours, one of the systems becomes hung.
     Unfortunately, this also hangs up ASE which means that the cluster as
     a whole is unaccessible.
     
     Since there is no real 'dump' of the kernel (the system just hangs), I
     have only a very little information. However, the following appears on
     the console when one of the members boots:
     
     
     Apr 30 16:05:33 cathy vmunix: cam_logger: CAM_ERROR packet
     Apr 30 16:05:33 cathy vmunix: cam_logger: bus 1
     Apr 30 16:05:33 cathy vmunix: isp_enable_lun
     Apr 30 16:05:33 cathy vmunix: Failed to enable target for selections
     Apr 30 16:05:33 cathy vmunix: cam_logger: CAM_ERROR entry too large to
     log!
     Apr 30 16:05:33 cathy vmunix: cam_logger: CAM_ERROR packet
     Apr 30 16:05:33 cathy vmunix: cam_logger: bus 1
     Apr 30 16:05:33 cathy vmunix: isp_enable_lun
     Apr 30 16:05:33 cathy vmunix: Failed to enable target for selections
     Apr 30 16:05:33 cathy vmunix: cam_logger: CAM_ERROR entry too large to
     log!
     Apr 30 16:05:33 cathy vmunix: cam_logger: CAM_ERROR packet
     Apr 30 16:05:33 cathy vmunix: cam_logger: bus 1
     Apr 30 16:05:33 cathy vmunix: isp_enable_lun
     Apr 30 16:05:33 cathy vmunix: Failed to enable target for selections
     Apr 30 16:05:33 cathy vmunix: cam_logger: CAM_ERROR entry too large to
     log!
     Apr 30 16:05:33 cathy vmunix: cam_logger: CAM_ERROR packet
     Apr 30 16:05:33 cathy vmunix: cam_logger: bus 1
     Apr 30 16:05:33 cathy vmunix: isp_enable_lun
     Apr 30 16:05:33 cathy vmunix: Failed to enable target for selections
     Apr 30 16:05:33 cathy vmunix: cam_logger: CAM_ERROR entry too large to
     log!
     Apr 30 16:05:33 cathy vmunix: cam_logger: CAM_ERROR packet
     Apr 30 16:05:33 cathy vmunix: cam_logger: bus 1
     Apr 30 16:05:33 cathy vmunix: isp_enable_lun
     Apr 30 16:05:33 cathy vmunix: Failed to enable target for selections
     Apr 30 16:05:33 cathy vmunix: cam_logger: CAM_ERROR entry too large to
     log!
     Apr 30 16:05:33 cathy vmunix: AM found a host at bus 8 target 5, lun 7
     Apr 30 16:05:33 cathy vmunix: AM found a host at bus 8 target 7, lun 7
     Apr 30 16:05:33 cathy vmunix: AM found a host at bus 9 target 5, lun 7
     Apr 30 16:05:33 cathy vmunix: AM found a host at bus 9 target 7, lun 7
     
     
     Anybody got an idea how to deal with it ?
     
     lars Bro
     lbro_at_dscc.dk
Received on Thu May 01 1997 - 11:13:49 NZST

This archive was generated by hypermail 2.4.0 : Wed Nov 08 2023 - 11:53:36 NZDT