Hi,
I'm trying to connect a pretty old digitizer with a AlphaStation 600
through serial port (DB9). I've check the cable and all switches
required to communicate (9600:8bits:1stop:parity none). But when testing
from "cat < /dev/tty00" and clicking the digitizer buttons I can see
some garbage sometimes and when testing from software (ARC/INFO) it says
that there is some problem with communication between digitizer and the
host. I used "stty -af /dev/tty00" to show the port settings and I can
change some settings with "stty -f /dev/tty00" like parity, for example.
Does anyone did something like that before?
I appreciate any help.
TIA
Wander
--
----------------------=======----------------------
Wanderley O. Mendes
Software Specialist wander_at_cptec.inpe.br
Phone: 55-012-560-8432 Fax: 55-012-561-2835
INPE/CPTEC - Cachoeira Paulista - Sao Paulo - Brazil
----------------------=======----------------------
Received on Fri Jun 06 1997 - 16:50:43 NZST