Hi,
About my configuration :
I'm using a KSPSC 3 channel RAID controller with 2 RZ28-VW in RAID 1 ( one
in ch0 and the other in ch1) for the whole OS and others, 3 RZ28-VW in RAID
0 (one in ch 0 and two in channel 1) 1 RZ28-VW in JBOD (in ch0) and 2 RZ28
in the i/o module. All the filesystems are ADVFS except the 2 filesystems
UFS in the 2 RZ28 in the I/O module, that were precisely reported "dirty".
re0 at xcr0
re1 at xcr0
re2 at xcr0
rz0 at scsi0 bus0 target0
rz1 at scs10 bus0 target1
Looking at the crash-data.<n> (thanks to Dr. Tom Blinn )
I could notice things like :
"panic (cpu 0) : k_mem fault IO error during kernel pagein
syncing disks ... advfs I/O error : set ID ..................
Active XCR_COM at time of error
device string for dump = RAID 0 7 0 0 0 0 0 ...........
I/O failed
Hard Error Detected........"
Is this the evidence of a hardware error in my KSPSC ? Because if it is
.....
Does the string RAID 0 7 0 0 0 0 0 have a decipherable meaning ?
Any comment about will be highly appreciated
TIA,
Ada
Sorry for this long msg but perhaps it was pertinent try to clarify the
configuration I'm using :-(
Received on Wed Jul 09 1997 - 20:58:07 NZST