Successfully converted one OpenVMS 2100 server to DigitalUNIX 4.0b.
Thanks, again, for all your help reminding me about firmware, base
license and smp license.
Ran into a RAID 1 problem. We used SWXCRMGR to set up 4 logical
drives across 2 BA350 Storageworks cabinets. Today, we added
another drive to each cabinet to make 4 logical drives. Used
SWXCRMGR to define group, format, etc.
Upon boot, at the console prompt, a SHOW DEV shows all 5 logical
drives. However, once the system is booted under DG4.0b, the
OS doesn't recognize the drives, ie, we cannot see them to
mount them. Had no problems with the original 4. The system
has been completely powered off and on, etc. We even broke the
5th logical set apart, regrouped them and reinitialized them with
no luck.
Any ideas?
Thanks so much! I will post a summary.
annette
Annette Hearn
Houston Community College System
Received on Wed Oct 01 1997 - 22:34:13 NZST