Hi all,
I would like to ask for your help once more ...
>
I have a spare harddisk from one of our suns that I would
like to add externally to my Dec 3000/600. It's an IBM 0663-E12
and I already have 2 harddisks and 1 cdrom on SCSI. Now
when I connect the new harddisk and reboot it looks like
the harddisk is being recognized:
----- EVENT INFORMATION -----
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OCCURRED/LOGGED ON Tue Feb 11 10:14:40 1997
SYSTEM ID x00020004 CPU TYPE: DEC 3000
MESSAGE Alpha boot: available memory
from _0x66a000 to 0x4000000
Digital UNIX V4.0 (Rev. 386);
Thu Aug_8 21:03:32 MET DST 1996
:
:
_(SEAGATE ST11200N 9300)
rz3 at scsi0 target 3 lun 0 (LID=1)
_(DEC RZ26L (C) DEC 440C)
rz4 at scsi0 target 4 lun 0 (LID=2)
_(DEC RRD42 (C) DEC 4.5d)
scsi1 at tcds0 slot 1
rz10 at scsi1 target 2 lun 0 (LID=3)
_(IBM OEM 0663E12 j j )
:
:
Firmware revision: 6.7
PALcode: OSF version 1.45
But next I don't get anything but SCSI-Errors:
----- EVENT INFORMATION -----
EVENT CLASS ERROR EVENT
OS EVENT TYPE 199. CAM SCSI
SEQUENCE NUMBER 1.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue Feb 11 10:15:44 1997
SYSTEM ID x00020004 CPU TYPE: DEC 3000
SYSTYPE x00000000
----- UNIT INFORMATION -----
CLASS x0000 DISK
SUBSYSTEM x0000 DISK
BUS # x0001
x0050 LUN x0
TARGET x2
There are two things I am not sure about:
- shall I set terminator power on or off?
- do I need to use an active terminator?
But next to that there might be other things I should do
that I am not aware of, and I do have to admit I am not
very well into the hardware stuff. So if anybody of you
can give me a hint or two, that would be very helpfull.
Thanks, Annette
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/ Annette Theissen
_/
_/ email: theissen_at_pfh.research.philips.com
_/ phone: (49) 40-50782657 (office)
_/ (49) 40-6905153 (home)
_/ fax: (49) 40-50782510
_/
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
Received on Tue Feb 11 1997 - 11:33:50 NZDT