Original question:
> The 4100 has 2 PCI busses. pci0 is a combination PCI and EISA bus and
> pci1 is only PCI. I have plugged in 4 additional differential SCSI
> controllers and find that only the two that are plugged into pci1 are
> recognised by the system. Even at the level of the SRM and the AlphaBIOS
> the 2 boards on pci0 are invisible. It doesn't seem as if pci0 is broken
> as the display adapter is plugged in thereand it certainly works. Are
> there any suggestions?
There were no responses, however what I did find was that the boards
were poorly designed and that when the installer had aligned the
retaining screws with the notches on the metal tabs that the boards
were poorly seated. I now have that machine setup with 6 SCSI buses
and no problems.
Charlie
---
*****************************************************************************
* Charles Richmond Integrated International Systems Corporation *
* cmr_at_iisc.com cmr_at_koibito.iisc.com cmr_at_shore.net *
* Specializing in UNIX, X, Image Processing, and Communications. *
* One Longfellow Place Suite 3309 , Boston , Ma. USA 02114-2431 *
* (617) 367 3151 FAX (617) 723 6861 *
*****************************************************************************
Received on Thu Aug 06 1998 - 14:37:56 NZST