Hi,
Can anyone tell me how to update the ECU (EISA Configuration Utility)?
The release notes for DU v4.0D say it should be updated to version 1.10
or higher, but I can't find any information about how to do this, apart
from the instructions for starting the ECU in the AlphaServer 2000
Owner's Guide. Do they just mean, make sure you have an ECU v1.10
diskette available in case you need to use it for configuration?
I have an AlphaServer 2000 4/233 which I have upgraded from DU v3.2C to
DU v4.0D (firmware updated to v5.0), which is now exhibiting the
condition described in the alpha-osf-managers archives whereby the
console screen resolution is set to 640x480, whereas before it was
1024x768. I intend to use the ECU to change the standard VGA controller
to ISA ATI MACH64 VGA, as described in the archives, but is there
something else I should be doing with the ECU at the same time?
Everything seems to work ok apart from the screen resolution.
Thanks for your help,
Helen Daley
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Helen Daley, Computer Systems Administrator e-mail: h.daley_at_newi.ac.uk
Post Point 22, North East Wales Institute, phone: 01978 293249
Wrexham, LL11 2AW, U.K. fax: 01978 293242/293254
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Received on Thu Aug 13 1998 - 12:00:55 NZST