SYSTEM DU4.0b
Terminal Server Annex ppp compatible to Decserver 90M
Terminal Server address is 148.128.21.5
2100 -------------- Annex --------- DS90M
/dev/ttysf ppp
1) Having problems with tip. Can someone please provide tip
configuration examples. Tip is not responding. Also telnet
148.128.20.5 7003 does not work. Why? How can I connect to a specific
port?
If I could only contact the terminal server I believe I could use
following to connect up ppp.
/usr/sbin/pppd connect '/usr/ucb/chat -v "" "atdtphonenumber"
"CONNECT" "\r" "Enter Annex port name or number" "cli\r"
"cli ppp"' /dev/ttysf 38400 -detach defaultroute 148.128.20.6:
148.128.20.6 netmask 255.255.255.0
2) Is the defaultroute the address for the Terminal server or the
local address on the port?
omsa01>tip -38400 913014574444
/dev/ttysf: Operation would block
fstat error: Bad file number
tip: Cannot stat tty file
omsa01>cat /etc/inittab
/etc/remote ------------->
# :el=^U^C^R^O^D^S^Q_at_:ie=#%$:oe=^D:at=robot:du
tip38400:tc=robot57600:\
robot|robotics|rob1200|U.S. ROBOTICS (UNSUPPORTED):\
dv=/dev/ttysf:pn=_at_:pa=none:br#38400:\
:el=^U^C^R^O^D^S^Q_at_:ie=#%$:oe=^D:at=robot:du
/etc/iniitab --------->
ons:1234:respawn:/usr/sbin/getty console console vt100
#modem:23:off:/usr/sbin/getty /dev/tty01 M57600 vt100
modem:23:respawn:/usr/sbin/getty /dev/ttysf 38400 vt100
Following is annex terminal settings. Im confused by local_address. I
set this to 148.128.20.6 but can't ping it. Can only ping ts address
of 148.128.20.5
admin : show port=3
port asy3:
Port Generic Parameters
mode: ppp location: ""
type: hardwired term_var: ""
prompt: "" cli_interface: uci
speed: 38400 autobaud: N
data_bits: 8 stop_bits: 1
parity: none max_session_count: 6
allow_broadcast: Y broadcast_direction: port
imask_7bits: N cli_imask7: Y
ps_history_buffer: 0 banner: Y
tcp_keepalive: 0 dedicated_address: 0.0.0.0
dedicated_port: telnet type_of_modem: ""
default_session_mode: interactive
Flow Control and Signal Parameters
control_lines: none input_flow_control: none
input_start_char: ^Q input_stop_char: ^S
output_flow_control: none output_start_char: ^Q
output_stop_char: ^S input_buffer_size: 1
bidirectional_modem: Y ixany_flow_control: N
need_dsr: N
admin : show port=3 ppp
port asy3:
local_address: 148.128.20.6 remote_address:
131.107.12.2
dialup_addresses: N metric: 1
slip_ppp_security: N do_compression: N
allow_compression: N ppp_mru: 1500
ppp_acm: 0x0 ppp_security_protocol: none
ppp_username_remote: "" ppp_password_remote: "<unset>"
ppp_ncp: all
admin :
Received on Thu Mar 26 1998 - 21:58:56 NZST