Dear Managers,
We have an Alphaserver 1000A with 4 PCI SCSI-Controllers : Normal SCSI
2 PCI SCSI-Controller : Wide SCSI
When powering off/on the Server mounts all disks: >>>sho dev all disks seen
single user boot all disks seen
multiuser boot all disks will
be mounted.
But:
After crash or shutdown/init 0 some strange things happen:
>>>show dev all disks seen
single user boot all disks seen
mulituser boot some disks are not mounted, error message: no such device !!!
The disks with the error message are not always the same. But the disks which
are not seen are all on the same PCI-SCSI-Controller at this time. Next boot,
other PCI-SCSI-Controller is not working correct (disks are mounted: no such
device!!!)
in console mode we set: set boot_reset on
The motherboard/cpu is replaced by a new one, same problems.
All disks are terminated correctly, but it's possible that the cables to long.
Here are some more informations about this machine:
Digital UNIX V4.0B (Rev. 564)
physical memory = 320.00 megabytes.
Firmware revision: 4.7
PALcode: OSF version 1.21
AlphaServer 1000A 5/333
pci2000 at pci0 slot 8
isp0 at pci2000 slot 0
isp0: QLOGIC ISP1020A
isp0: Firmware revision 2.10 (loaded _by console)
scsi0 at isp0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(DEC RZ28D (C) DEC 0010)
_(Wide16)
rz1 at scsi0 target 1 lun 0 (LID=1)
_(SEAGATE ST39173W 6244)
_(Wide16)
rz4 at scsi0 target 4 lun 0 (LID=2)
_(DEC RRD45 (C) DEC 0436)
tz5 at scsi0 target 5 lun 0 (LID=3)
_(DEC TLZ09 (C)DEC 0167)
psiop0 at pci2000 slot 1
Loading SIOP: script c000a600, reg
_82011000, data 40644540
scsi1 at psiop0 slot 0
rz8 at scsi1 target 0 lun 0 (LID=4)
_(SEAGATE ST41650 6050)
rz9 at scsi1 target 1 lun 0 (LID=5)
_(DEC DSP5200S T365)
rz10 at scsi1 target 2 lun 0 (LID=6)
_(DEC DSP5350S 427B)
rz12 at scsi1 target 4 lun 0 (LID=7)
_(SEAGATE ST15230N 0168)
psiop1 at pci2000 slot 2
Loading SIOP: script c0016600, reg
_82011100, data 40644940
scsi2 at psiop1 slot 0
rz16 at scsi2 target 0 lun 0 (LID=8)
_(SEAGATE ST410800N 0019)
rz19 at scsi2 target 3 lun 0 (LID=9)
_(DEC DSP5400S 427L)
psiop2 at pci2000 slot 3
Loading SIOP: script c0022600, reg
_82011200, data 40644d40
scsi3 at psiop2 slot 0
rz24 at scsi3 target 0 lun 0 (LID=10)
_(SEAGATE ST423451N 0011)
rz25 at scsi3 target 1 lun 0 (LID=11)
_(SEAGATE ST423451N 0011)
rz26 at scsi3 target 2 lun 0 (LID=12)
_(SEAGATE ST15230N 0638)
psiop3 at pci2000 slot 4
Loading SIOP: script c002e600, reg
_82011300, data 40645140
scsi4 at psiop3 slot 0
rz33 at scsi4 target 1 lun 0 (LID=13)
_(SEAGATE ST410800N 7112)
rz38 at scsi4 target 6 lun 0 (LID=14)
_(DEC DSP5350S 427B)
tu0: DECchip 21140: Revision: 2.0
tu0: auto negotiation capable device
tu0 at pci0 slot 11
tu0: DEC TULIP (10/100) Ethernet
_Interface, hardware address:
_00-00-F8-04-7B-12
tu0: auto negotiation off: selecting
_100BaseTX (UTP) port: half duplex
pci3000 at pci0 slot 12
isp1 at pci3000 slot 0
isp1: QLOGIC ISP1020A
isp1: Firmware revision 2.10 (loaded
_by console)
scsi5 at isp1 slot 0
rz42 at scsi5 target 2 lun 0 (LID=15)
_(SEAGATE ST19171W 0024)
_(Wide16)
rz43 at scsi5 target 3 lun 0 (LID=16)
_(IBM OEM DCHS09W 2222)
_(Wide16)
gpc0 at eisa0
No FRU table entry found in
_console-rpb
--Not creating a FRU table errorlog
_packet
kernel console: ace0
dli: configured
Any suggestions?
Thanks, H. Baumgartner
--
Harald Baumgartner Max-Planck-Inst. fuer Extraterrestrische Physik
Postf. 1603, D-85740, Garching bei Muenchen, Germany
Phone :(Country Code 49) 89 3299-3346 (Fax: -3569)
e-mail: hmb_at_mpe.mpg.de, MPE::HMB
http://www.xray.mpe.mpg.de/~hmb/
Received on Mon Jan 18 1999 - 08:59:10 NZDT