HSZ40 : recovered error ??

From: <marty.cruchten_at_paulwurth.com>
Date: Tue, 11 May 1999 10:42:30 +0200

> Hello managers,
>
> this morning, I got the following message on my HSZ40 controller
> console:
>
>
> %EVL--HSZ40-2> --10-APR-1946 09:52:02 (time not set)-- Instance
> Code: 0326450A
> Template: 81.(51)
> Power On Time: 3. Years, 21. Days, 10. Hours, 27. Minutes, 20.
> Seconds
> Controller Model: HSZ40
> Serial Number: ZG60105044 Hardware Version: B03(0D)
> Firmware Version: V32Z(32)
> Unit Number: 201.(00C9)
> Unit Software Version: 1.(01) Unit Hardware Version: 54.(36)
> Retry Level: 1. Retries: 0.
> Port: 5. Target: 0. LUN: 0.
> SCSI Device Type: 0.(00)
> Device ID: 'RZ29L-AA (C) DEC' Device Serial Number: '09155696'
> Device Firmware Revision Level: 'LYJ0'
> SCSI Command Opcode: 40.(28)
> Sense Data Qualifiers: 128.(80)
> SCSI Sense Data:
> Error Code: 112.(70) {current command execution}
> Information field is valid
> Segment: 0.(00)
> Sense Key: 1.(01) RECOVERED ERROR
> ILI: 0 EOM: 0 FM: 0
> Information: B0443E00
> Additional Sense Length: 10.(0A)
> Command-Specific Information: 55033509
> ASC: 24.(18) ASCQ: 136.(88)
> FRU: 0.(00) Sense-Key Specific: 1F0080
> Instance Code: 0326450A
> HSZ40-2>
>
> The disk referenced is part of a stripeset of 3 disks and this
> stripeset makes up an
> LSM volume which belongs to an ASE service.
>
> In the daemon.log of the cluster servers, I got the Error message:
>
> ux04 Agent Error: soft device error on /dev/rzb18g from ux04
>
> No other error messages can be found, either in the daemon.log nor in
> the kern.log.
>
> With "dia", I also get an error entry with the following summarized
> info:
>
>
> ------ Packet Type ------ 258. Module Name String
>
> Routine Name cdisk_bbr_done
>
> ------ Packet Type ------ 256. Generic String
>
> bbr_start: BBR disabled bad block
> number:
> 4080816
>
> ------ Packet Type ------ 261. Soft Error String
>
> Error Type Soft Error Detected (recovered)
>
> ------ Packet Type ------ 256. Generic String
>
> Error, exception, or abnormal
> condition
>
> ------ Packet Type ------ 256. Generic String
>
> RECOVERED ERROR - Recovery action
> performed
>
> ------ Packet Type ------ 768. SCSI Sense Data
> Packet Revision 0.
>
> ------- HSZ Data -------
> Instance Code x0326450A The disk device reported Vendor
> Unique
> SCSI Sense Data.
>
> Component ID = Device Services.
> Event Number = x00000026
> Repair Action = x00000045
> NR Threshold = x0000000A
> Template Type x51 Disk Transfer Error.
> Template Flags x01 HCE = 1, Event occurred during
> Host
> Command Execution.
> Ctrl Serial # ZG60105044
> Ctrl Software Revision V32Z
> RAIDSET State x00 NORMAL. All members present and
> reconstructed, IF LUN is
> configured as a
> RAIDSET.
>
>
> Looking at all this information, I suppose that the problem was
> corrected successfully.
>
> But my question is:
>
> - Is the problem really solved?
>
> - What should I think of this problem? Should I worry about this
> disk? Is this a
> problem that can occur periodically or should I have a special eye
> on this disk in
> the future?
>
>
> Best regards
>
> Marty Cruchten
> marty.cruchten_at_paulwurth.com
Received on Tue May 11 1999 - 08:45:14 NZST