Hi managers,
I have two Alphaserver 1200 with Digital Unix 4.0D and TruCluster
ASE 1.5 installed with patches (patches 3 shipped on february 1999).
Systems share a Raid ARRAY 7000 with a HSZ70 RAID controller( HSOF
V7.1).
I had setup two mirrorsets on this Storage .
My problem is : when i create an ASE disk service with an IP
address, the service failed with the following error message in the
console log:
Jul 29 12:25:12 DEPPDEV ASE: DEPPDEV Agent Notice: adding service
INTRASERVICE
Jul 29 12:25:12 DEPPDEV ASE: DEPPEXP Agent Notice: adding service
INTRASERVICE
Jul 29 12:26:13 DEPPDEV ASE: DEPPEXP Agent Error: timeout waiting on
/var/ase/sbin/nfs_ifconfig action completion
Jul 29 12:26:13 DEPPDEV ASE: DEPPDEV Agent Error: timeout waiting on
/var/ase/sbin/nfs_ifconfig action completion
Jul 29 12:27:13 DEPPDEV ASE: DEPPEXP Agent Error: timeout waiting on
/var/ase/sbin/nfs_ifconfig action completion
Jul 29 12:27:14 DEPPDEV ASE: DEPPDEV Agent Error: timeout waiting on
/var/ase/sbin/nfs_ifconfig action completion
Jul 29 12:27:14 DEPPDEV ASE: DEPPDEV Director Error: can't add service
Jul 29 12:27:14 DEPPDEV ASE: DEPPDEV AseMgr Error: Add failed - Unable
to add service.
Jul 29 12:27:20 DEPPDEV ASE: DEPPDEV AseMgr Error: Add/Start failed -
Service INTRASERVICE not added...
But when i create it without IP address, the service is add an all work
fine. in the console log i had:
Jul 29 12:42:12 DEPPDEV ASE: DEPPDEV Agent Notice: adding service
INTRASERVICE
Jul 29 12:42:12 DEPPDEV ASE: DEPPEXP Agent Notice: adding service
INTRASERVICE
Jul 29 12:42:13 DEPPDEV ASE: DEPPEXP Director Notice: added service
INTRASERVICE
Jul 29 12:42:13 DEPPDEV ASE: DEPPDEV AseMgr Notice: Added service
INTRASERVICE
Jul 29 12:42:13 DEPPDEV ASE: DEPPDEV Agent Notice: starting service
INTRASERVICE
Jul 29 12:42:14 DEPPDEV ASE: DEPPEXP Director Notice: started
INTRASERVICE on DEPPDEV
Jul 29 12:42:15 DEPPDEV ASE: DEPPEXP Director Notice: stored a new ASE
configuration database
i had this error:
# cluster_map_create -full
Members running are: ( DEPPDEV DEPPEXP )
Permission denied.
Permission denied.
Doing device table scans.
.Permission denied.
Permission denied.
...Error: Asymmetric shared SCSIs in ASE ASE_ID_0 between members
DEPPDEV and DEPPEXP.
Shared SCSI buses are not symmetrically configured.
in the two systems i had:
# rcmgr get ASE_ID
0
# scu scan edt
Scanning all available buses, please be patient...
# scu show edt
CAM Equipment Device Table (EDT) Information:
Device: TLZ10 Bus: 0, Target: 0, Lun: 0, Type: Sequential
Access
Device: RRD47 Bus: 0, Target: 5, Lun: 0, Type: Read-Only Direct
Access
Device: RZ1CB-CS Bus: 1, Target: 0, Lun: 0, Type: Direct Access
Device: HSZ70 Bus: 3, Target: 2, Lun: 0, Type: Direct Access
Device: HSZ70 Bus: 3, Target: 2, Lun: 1, Type: Direct Access
Device: DEC R01 A11 Bus: 3, Target: 7, Lun: 7, Type: Processor
Hosts file is the same on both systems, and the rhosts is ok.
Thanks for your Help !
Best Regards,
James
Received on Thu Jul 29 1999 - 15:49:21 NZST