Problems, two RA230-controllers

From: Danny Petterson <DP_at_benau.dk>
Date: Wed, 01 Sep 1999 21:23:46 +0100

>Hi Everybody!
>
>I've got two RA230-controllers in a AlphaServer 1200, and when Unix is up
>and running the logical drives work fine. BUT.... I am a bit worried about
>the errors I get when the machine boots (see the print from uerf below).
Any
>clues what it is, and how I can get rid of the errors?
>
>Yours Faithfully
>
>Danny Petterson
>
>
>
>xcr0. Please wait....
> xcr0 at pci0 slot 3
> re0 at xcr0 unit 0 (unit status
>=
> _ONLINE, raid level = JBOD)
> (WRITE BACK cache operation
>SUPPORTED
> _if battery backup enabled)
> re1 at xcr0 unit 1 (unit status
>=
> _ONLINE, raid level = 5)
> (WRITE BACK cache operation
>SUPPORTED
> _if battery backup enabled)
> re2 at xcr0 unit 2 (unit status
>=
> _ONLINE, raid level = 5)
> (WRITE BACK cache operation
>SUPPORTED
> _if battery backup enabled)
> re3 at xcr0 unit 3 (unit status
>=
> _ONLINE, raid level = 5)
> (WRITE BACK cache operation
>SUPPORTED
> _if battery backup enabled)
> Initializing xcr1. Please
>wait....
> xcr1 at pci0 slot 4
> xcr_logger: XCR_ERROR packet
> xcr_logger: cntrl 1 unit 2
> re_getdrive
> Cmd should always return good
>status
> Hard Error Detected
> Active XCR_COM at time of error
> xcr_logger: XCR_ERROR packet
> xcr_logger: cntrl 1 unit 2
> re_getdrive
> Cmd memory lost
> Possible Software Problem -
>Impossible
> _Cond Detected
> Active XCR_COM at time of error
> xcr_logger: XCR_ERROR packet
> xcr_logger: cntrl 1 unit 3
> re_getdrive
> Cmd should always return good
>status
> Hard Error Detected
> Active XCR_COM at time of error
> xcr_logger: XCR_ERROR packet
> xcr_logger: cntrl 1 unit 3
> re_getdrive
> Cmd memory lost
> Possible Software Problem -
>Impossible
> _Cond Detected
> Active XCR_COM at time of error
> re12 at xcr1 unit 12 (unit
>status =
> _ONLINE, raid level = 5)
> (WRITE BACK cache operation
>SUPPORTED
> _if battery backup enabled)
> re13 at xcr1 unit 13 (unit
>status =
> _ONLINE, raid level = 5)
> (WRITE BACK cache operation
>SUPPORTED
> _if battery backup enabled)
> re14 at xcr1 unit 14 (unit
>status =
> _ONLINE, raid level = 5)
> (WRITE BACK cache operation
>SUPPORTED
> _if battery backup enabled)
> Created FRU table binary error
>log
> _packet
> kernel console: tga0
> dli: configured
>
>
>
>
>> Med venlig hilsen
>>
>> Danny Petterson Benau Konsulent Afd.
>> DP_at_BENAU.DK HTTP://WWW.BENAU.DK
>> TLF:87 93 36 00 DIREKTE:45 16 08 34
>>
Received on Wed Sep 01 1999 - 19:26:19 NZST