Hello,
I have a brand new XP1000. It's got firmware V5.5-7 (I don't understand
what kind of number that is, but that's what it says,) and it's running
T64U4.0F. My problem is that I'm trying to use an MSB-(sound)-card with
the box, and that's supposed to be configured in with the 'isacfg'. I
first remove the ES1888 and the isacfg in the new one. So far, so good.
However, the machine doesn't probe the card at boot. I can't figure out
why it doesn't. When I say 'show config' to the console, after having
done 'init' (required to make changes permanent), the entry I just
configured in (with '-enadev 1') shows 'No' for ENABLED. If I ask with
'isacfg' it shows enadev = 1. Before I say init it seems to be all ok.
This might be just a cosmetic problem, but since the card isn't probed
properly, I suspect this could be a problem.
Any ideas?
//Per
---
Per Boussard, KI/ERA/T/VU Office: +46 8 404 55 11
UNIX System Administrator Fax: +46 8 757 55 50
Ericsson Radio Systems AB Home: +46 8 570 349 67
S-164 80 STOCKHOLM, SWEDEN Email: Per.Boussard_at_era-t.ericsson.se
Received on Fri Oct 08 1999 - 09:40:20 NZDT