This happens:
--------------cut-------------------------------
>>>boot dva0
(boot dva0.0.0.0.1 -flags A)
block 0 of dva0.0.0.0.1 is a valid boot block
reading 2612 blocks from dva0.0.0.0.1
bootstrap code read in
base = 138000, image_start = 0, image_bytes = 146800
initializing HWRPB at 2000
initializing page table at 12a000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
ff.fe.fd.fc.fb.fa.f9.f8.f7.f6.f5.
ef.ee.ed.ec.eb.ea.e9.f4.e8.e7.e5.e4.
Digital AlphaStation 500/333 Console V7.0-96
built on Apr 7 1999 at 15:44:18
>>>(boot pmem:180000 -flags unit=1)
bootstrap code read in
base = 180000, image_start = 0, image_bytes = 800000
initializing HWRPB at 2000
initializing page table at 74a000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
APU-E Manufacturing Header Incorrect
APU-E Manufacturing Header Incorrect
*** Digital AlphaStation 500/333 -- Firmware Update ***
Use HELP or ? for help
Update
Verify
List
Show
DEbug
NDebug
?
Apu-> update
Unknown (0x01)
APU-E ROM DEVICE JUMPER ON ?
Unknown (0x01)
APU-E ROM DEVICE JUMPER ON ?
Apu->
------------cut-----------------------------------------------------
And no, the flash rom write enabler jumper is on. As a matter
of fact, there is now difference wether the jumper is on/off
or completely removed...
I tried this also with the firmware 5.3 cd-rom but same
things happened.
This was 5.5 with the floppyboot as you see.
Please help. I'll summarize if I get a working solution...
--
Tony Lindström * System Manager * Tekla Oy
tel:+358 9 887 9441 gsm:+358 40 762 0768
http://www.iki.fi/tonyk/ mailto:tonyk_at_iki.fi
Received on Mon Nov 01 1999 - 15:59:25 NZDT