Hello gurus,
thank you for much hints. But now things become more and more strange:
look at following output of "dia -R":
DECevent V3.3
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 0.
Timestamp of occurrence 19-DEC-2004 10:57:29
Host name goaw12
.......
Digital Personal WorkStation 433au
Firmware revision: 7.0-10
PALcode: Digital UNIX version 1.22-0
pci0 at nexus
tu0: DECchip 21143: Revision: 3.0
tu0: auto negotiation capable device
tu0 at pci0 slot 3
tu0: DEC TULIP (10/100) Ethernet Interface, hardware address:
00-00-F8-75-E4-47
tu0: auto negotiation off: selecting 10BaseT (UTP) port: half duplex
Output of /var/adm/messages:
Jan 31 09:48:15 goaw12 vmunix: Alpha boot: available memory from 0xdb0000 to
0x1
7ffe000
Jan 31 09:48:16 goaw12 vmunix: Digital UNIX V4.0F (Rev. 1229); Tue Jun 29
13:26
:05 MET DST 1999
Jan 31 09:48:16 goaw12 vmunix: physical memory = 384.00 megabytes.
Jan 31 09:48:16 goaw12 vmunix: available memory = 370.32 megabytes.
Jan 31 09:48:16 goaw12 vmunix: using 1467 buffers containing 11.46 megabytes
of
memory
Jan 31 09:48:16 goaw12 vmunix: Digital Personal WorkStation 433au
Jan 31 09:48:16 goaw12 vmunix: Firmware revision: 7.0-10
Jan 31 09:48:16 goaw12 vmunix: PALcode: Digital UNIX version 1.22-0
Jan 31 09:48:16 goaw12 vmunix: pci0 at nexus
Jan 31 09:48:16 goaw12 vmunix: tu0: DECchip 21143: Revision: 3.0
Jan 31 09:48:16 goaw12 vmunix: tu0: auto negotiation capable device
Jan 31 09:48:16 goaw12 vmunix: tu0 at pci0 slot 3
Jan 31 09:48:16 goaw12 vmunix: tu0: DEC TULIP (10/100) Ethernet Interface,
hardware address: 00-00-F8-75-E4-47
Jan 31 09:48:16 goaw12 vmunix: tu0: auto negotiation off: selecting
100BaseTX (UTP) port: full duplex
Jan 31 09:48:16 goaw12 vmunix: ata0 at pci0 slot 4
Digital Unix 4.0F (no patchkit because /var/adm/patch does not exist and
setld -i | grep OSFPAT does not display anything)
Console mode shows "ewa0_mode=fastfd". Because the NIC ist connected to a
switch which port is configured to "speed=100, duplex=full, autosensing=off"
and all works fine NIC speed is definitely 100 M/s!
# consvar -g ewa0_mode
ewa0_mode = FastFD (Full Duplex)
# date
Wed Jan 31 16:13:06 MET 2001
#
1. date of "dia" is wrong but after finishing boot date-command show the
rigt date ?????????
2. "dia" says: "10BaseT half duplex"
/var/adm/messages says: "100Base-TX, full duplex"
What is going wrong?
regards
Werner Rost
--------------------------------------------------
Werner Rost, Mannesmann-Boge GmbH
Abt: KIR
Tel: 0228/3825-420
Fax: 0228/3825-398
Email: werner.rost_at_boge.mannesmann.de
Friesdorfer Str. 175, 53175 Bonn - Bad Godesberg
---------------------------------------------------
-----------------------------------------------------------
This Mail has been checked for Viruses
Attention: Encrypted Mails can NOT be checked !
***
Diese Mail wurde auf Viren ueberprueft
Hinweis: Verschluesselte Mails koennen NICHT geprueft werden!
------------------------------------------------------------
Received on Wed Jan 31 2001 - 15:20:32 NZDT