Hi, Managers
I'm trying to install one KZPCM-DX in an AS8400 5/625. I installed the
operating system (DU40F), the pk4 and also installed the NHD-3. The firmware
revision is 5.7.
The NHD-3 installation included some lines into the kernel file (like
following):
bus pci2000 at pci0 slot 10
bus itpsa0 at pci2000 slot 0 vector itpsaintr
controller scsi2 at itpsa0 slot 0
bus itpsa1 at pci2000 slot 1 vector itpsaintr
controller scsi3 at itpsa1 slot 0
controller tu1 at pci2000 slot 2
The physical position of the card is correct - PCI 0, slot 10!
The new kernel was re-linked and the box rebooted, but in the
/var/adm/messages file an error still apearing!
Mar 24 22:21:18 vmunix: PCI device at bus 1, slot 2, function 0 could not be
configured:
Mar 24 22:21:18 vmunix: Vendor ID 0x10b5, Device ID 0x906d, Base class 0x2,
Sub class 0x80 Sub-VID 0x10df Sub-DID 0x1133
Mar 24 22:21:18 vmunix: has no matching entry in the PCI option table
Mar 24 22:21:18 vmunix: PCI device at bus 1, slot 4, function 0 could not be
configured
Mar 24 22:21:18 vmunix: :
Mar 24 22:21:18 vmunix: Vendor ID 0x10b5, Device ID 0x906d, Base class 0x2,
Sub class 0x80 Sub-VID 0x10df Sub-DID 0x1133
Mar 24 22:21:18 vmunix: has no matching entry in the PCI option table
I'll really apreciate any help!!
Regards,
-----
Andre Luis Diniz Pinho
Coordenador de Suporte UNIX / DTIN-TIPD-PDST
71-9149-9157 / 71-340-3255 / Fax: 71-340-3205
Received on Sun Mar 25 2001 - 02:25:07 NZST