First of all, thanks go out to :
Corinne Haesaerts
Bryan Whiting
Alan Davis
Bryan Lavelle
Andreas Maagdenberg
Paul Henderson
and of course Dr. Tom Blinn!
All,
first and foremost, the problem appears to be unrelated to the EFT for
V5.1a; it does appear to be a bad BA356 shelf. I can only access two of the
four slots. I have checked the jumpers on it and it is not set for split bus
mode. When I tired to run clu_add member this AM and got the same errors,
this was the final piece to the puzzle.
Secondly, it was pointed out that as a Compaq employee there are internal
resources available to me, that many on this list do not have. By way of
explanation and a general "mea culpa", I am a contractor, not an employee
and therefore have not had much opportunity to explore the many internal
resources available, although I do work closely with our local COS mission
critical groups and have worked with many fine individuals working in the
various support groups.
I have been lurking around and occasionally posting to this group for many
years, so my first instinct was to post my problem here, sorry for the
wasted B/W.
Several of you agreed that the version of the EFT I was using was old and
pointed me to a site where the latest build will be available and a couple
of you suggested opening a problem report. I was advised against this,
because there have been several subsequent builds. I expect to recieve the
real distribution soon and will test with it.
Original question below.
Hey now managers! I could use a little assistance, if you please. I am an
early adopter for the Tru64 V5.1a EFT, because we need the LAN interconnect.
I have loaded the OS and everything was coming along until I attempted to
run clu_create. This command fails when trying to configure the quorum disk.
.... excerpts from clu_creat deleted
The quorum disk I am trying to use is a RZ1CD-CS and I have tried two
different disks, in case that was an issue, with the same result. Could
possibly be a problem with the BA356, but not sure how to identify it. The
disks are seen by the system and I can read and zero the disklabel.
My environment is the following: Tru64 5.1a EFT/TruCluster 5.1 without
patches (yet) 1xDS20/128MB, 1xDS10/384MB, 1xBA356-KH Storage shelf,
2xKZPBA-CB with y-cable/termination, No MC; using LAN Interconnect, Cluster
root/usr/var
Any help greatly appreciated.
Thanks!
rrc
Randall Cable
Professional Services - North America.
COMPAQ Services
- Phone at Compaq: (719) 592-7114
- Fax: (719) 592-7159
mailto:Randall.Cable_at_compaq.com
Received on Thu Aug 23 2001 - 20:36:10 NZST