Hello Gurus,
Here is what I've tried so far:
* I've tried physically connecting the actual TZ88 External Tape
drive.
* At the console prompt I don't see a tape device( how can I make the
console/bios see the tape device?
* Do I need to configure this tape drive through the Array
Controller?
* Does anybody know what the device name should be on the console
prompt?
* Also tried changing to all the SCSI IDs from 0, 1, 2, 3, 4, 5, 6,
7.
* When the server is trying to boot the Tape Drive connected all I
get is SCSI CAM Errors running on a loop.
Any suggestions are welcome.
Thanks in advance,
JR.
------------------------------------------------------------------------
>From here down is the original message
------------------------------------------------------------------------
FYI:
We've just purchased a DS20E Alpha Server, which came without a tape
drive and I'm looking for the best way to add a Single DLT Tape drive
for backups.
This DS20E server came with a 3X-KZPCA-AA Controller.
Q:
What's the best way to add a single DLT tape drive to this DS20 Server?
------------------------------------------------------------------------
Thanks in advance,
JR.
Received on Thu Nov 01 2001 - 16:52:29 NZDT