That was easy... :)
1. Boot with genvmunix into single mode
(>>>boot -fi genvmunix -fl s)
2. Configure new kernel
(duconfig)
And its running :)
Thanks to:
alan_at_nabeth.cxo.cpqcorp.net
Degerness, Mandell MSER:EX [Mandell.Degerness_at_gems2.gov.bc.ca]
Sincerely,
Joel
-----Original Message-----
From: Joel Vősu
Sent: Friday, November 30, 2001 1:25 AM
To: Tru64 unix managers (tru64-unix-managers_at_ornl.gov)
Subject: Tru64Unix 4.0G problem with DLT8000
Hello All,
This is the best place to find help when you're in trouble! You have all
been very helpful before, thank you very much for that. Now I ran into
some problems.
I was installing an external DLT8000 drive on AlphaServer DS20E
(667mhz). It recognizes it at the srm console, but the operating system
fails to find the drive. I'm using Tru64Unix 4.0G PK3 installed. The
SCSI card is SN-KZPCA-AX (single-ended) and the storage shelf connector
is DS-BA35X-FA (one channel Single-ended). The storage shelf is
connected to the server with 1,5 meter cable.
Can you pelase help me solve this problem?
Sincerely,
Joel
________________________________
Joel Vősu
Systems Engineer
Kungla Dialoog C.P.
mailto:joel_at_kungla.ee
GSM: +372 51 83778
________________________________
Received on Tue Dec 04 2001 - 13:53:35 NZDT