Dear fellows,
this morning a strange thing hits my AS1200. All at once the system went down.
First I didn't notice the fact, since the system is located in the server room,
closed and locked. So nobody may get into. I sat at my desktop working, just
want to open the Netscape Mail Composer on XP900. The XP900 froze and I couldn't
do anything. Since the XP900 nfs-mounts the users home from the AS1200 the nfs
server was not available. My first thought was Netscape crashed the Xserver,
though. But within a second my colleagues phoned me, that the servers is no
longer available.
So I went to the server room and found the AS1200 down on the knees at the SRM
prompt. The system is at v4.0f pk6, SRM is at 6.0-1, latest version available
from COMPAQ. Well, tried to boot the system and first didn't came up. Instead I
got the already known boot fail message, which I include in the mail as an
attachment. This symptom appears now and then when the system is switched on
(main power). After switching off and on the system did a regular boot. The
regular boot is attached as well. The equipment can be seen there.
While the server AS1200 was down I couldn't anything on my XP900. The CDE was
completely frozen. This is very annying, since nothing system related is
imported.
After the AS1200 was booting I was thinking I will get a crash dump, but
savecore didn't wrote a crash dump (the /var/adm/crash has 1.2 G available). I
searched all available logs, but I couldn't get any information was caused the
total halt without any notice.
But the next strange thing is that even after the AS1200 was up again even the
XP900 (v4.0f, pk6) was not responding. I thought that if the nfs server will be
back up again everything should work without harm. I triend to connect to the
XP900, but to no avail. I had to manually switch of the XP900. It was impossible
to connect to the system. Another XP900 showed the same behavior. And the more
strange thing, nobody was actually working on the system.
Now I'm very confused what could have produced the crash of the AS1200 and why
the XP900 weren't responding anymore.
Any insight is very appreciated.
TIA
Uwe Lienig
i9nit
P00>>>
P00>>>ii9nitni9nitti9nit
P00>>>iinti9nitninti9nitiinti9nittinti9nit
initinti9nit: No such command
P00>>>init
Initializing...
þ
SROM V3.0 on cpu0
SROM V3.0 on cpu1
XSROM V6.0 on cpu0
XSROM V6.0 on cpu1
BCache testing complete on cpu0
BCache testing complete on cpu1
mem_pair0 - 256 MB
mem_pair1 - 256 MB
mem_pair2 - 256 MB
mem_pair3 - 256 MB
mem_pair4 - 64 MB
mem_pair5 - 64 MB
20..20..21..21..23..
please wait 30 seconds for T24 to complete
24..24..
Memory testing complete on cpu0
Memory testing complete on cpu1
starting console on CPU 0
sizing memory
0 256 MB DIMM
1 256 MB DIMM
2 256 MB DIMM
3 256 MB DIMM
4 64 MB DIMM
5 64 MB DIMM
starting console on CPU 1
probing IOD1 hose 1
bus 0 slot 1 - NCR 53C810
bus 0 slot 2 - QLogic ISP10X0
probing IOD0 hose 0
bus 0 slot 1 - PCEB
probing EISA Bridge, bus 1
bus 0 slot 3 - DECchip 21140-AA
bus 0 slot 4 - DECchip 21143-AA
configuring I/O adapters...
ncr0, hose 1, bus 0, slot 1
isp0, hose 1, bus 0, slot 2
floppy0, hose 0, bus 1, slot 0
tulip0, hose 0, bus 0, slot 3
tulip1, hose 0, bus 0, slot 4
access violation fault
PCB = 001223E0 (config_adap)
PC = 55555555 55555554
VA = 55555555 55555555
exception context saved starting at 001242C0
GPRs:
0: 00000000 00000001 16: 00000000 00000004
1: 00000000 00000001 17: 00000000 0011FCA0
2: 00000000 00057D00 18: 00000000 0008BC30
3: 00000000 00000004 19: 00000000 00000025
4: 00000000 0011FCA0 20: 00000000 001387C0
5: 00000000 00000003 21: 00000000 00000000
6: 00000000 00000002 22: 00000000 00054850
7: 00000000 00000002 23: 00000000 00000001
8: 00000000 0011FE88 24: 00000000 0011343A
9: 00000000 00000000 25: 00000000 00000002
10: 00000000 0011FCA0 26: 00000000 000228A0
11: 00000000 00000000 27: 00000000 00000000
12: 00000000 00000000 28: 00000000 FFB000FF
13: 00000000 00000000 29: 00000000 00124400
14: 00000000 00000000 30: 00000000 00124400
15: 00000000 00000000
Overlay name memadr topadr size ref
rawhide 1a000 71400 357376 0
powerup 71420 77420 24576 1
advshell a4b00 abd00 29184 1
basiccmd 990e0 a4ae0 47616 1
advcmd abd20 bcf20 70144 1
environ 7c660 83e60 30720 1
phase3 948c0 990c0 18432 1
pci 83e80 90680 51200 1
eisa 906a0 948a0 16896 1
ether dd700 e1500 15872 1
scsi ceaa0 d3ea0 21504 2
dv bcf40 bf940 10752 1
tulip d44e0 dd6e0 37376 1
diagsupport 77440 7c640 20992 1
kernel_mapsym c1560 c9960 33792 0
powerup_mapsym c9980 c9f80 1536 0
advshell_mapsym c9fa0 ca7a0 2048 0
basiccmd_mapsym ca7c0 cb1c0 2560 0
advcmd_mapsym cb1e0 cbbe0 2560 0
environ_mapsym cbc00 cca00 3584 0
phase3_mapsym cca20 cd020 1536 0
pci_mapsym cd040 cde40 3584 0
eisa_mapsym cde60 ce460 1536 0
ether_mapsym c07a0 c0ba0 1024 0
scsi_mapsym d3ec0 d44c0 1536 0
dv_mapsym bf960 bfd60 1024 0
tulip_mapsym bfd80 c0780 2560 0
diagsupport_mapsym ce480 cea80 1536 0
dump of active call frames:
PC = 55555554
PD = 00057D00 (DRIVER_SET)
FP = 00124400
SP = 00124400
R2 R3 R4 R29 saved starting at 00124408
R2 = 00057E60
R3 = 001152A0
R4 = 00000000
R29 = 00124430
PC = 000200F8
PD = 00057E60 (POLL_UNITS_UNDER_IOD)
FP = 00124430
SP = 00124430
R2 R3 R4 R5 R6 R7 R8 R9 R10 R29 saved starting at 00124438
R2 = 00057F00
R3 = 00000000
R4 = 00000003
R5 = 00000002
R6 = 00000001
R7 = 0001CDB8
R8 = 0001CDC8
R9 = 0001CDB8
R10 = 00000000
R29 = 00124490
PC = 0001FDC0
PD = 00057F00 (POLL_UNITS)
FP = 00124490
SP = 00124490
R2 R3 R4 R5 R6 R7 R8 R9 R29 saved starting at 00124498
R2 = 00057FB8
R3 = 0005529C
R4 = 0001CC98
R5 = 00000000
R6 = 00000000
R7 = 00000000
R8 = 00000000
R9 = 00000000
R29 = 00124530
PC = 00022720
PD = 00057FB8 (CONFIGURE_IO_ADAPTERS)
FP = 00124530
SP = 001244F0
R2 R3 R4 R29 saved starting at 00124560
R2 = 0005C8A0
R3 = 001223E0
R4 = 001225B0
R29 = 00124590
PC = 00036EA4
PD = 0005C8A0 (KRN$_PROCESS)
FP = 00124590
SP = 00124550
R2 R3 R4 R29 saved starting at 00124598
R2 = 00000000
R3 = 00000000
R4 = 00000000
R29 = 00000000
breakpoint at PC 69180 desired, XDELTA not loaded
access violation fault
PCB = 001223E0 (config_adap)
PC = 55555555 55555558
VA = 55555555 55555558
exception context saved starting at 001242C0
GPRs:
0: 00000000 00000001 16: 00000000 00000004
1: 00000000 00000001 17: 00000000 0011FCA0
2: 00000000 00057D00 18: 00000000 0008BC30
3: 00000000 00000004 19: 00000000 00000025
4: 00000000 0011FCA0 20: 00000000 001387C0
5: 00000000 00000003 21: 00000000 00000000
6: 00000000 00000002 22: 00000000 00054850
7: 00000000 00000002 23: 00000000 00000001
8: 00000000 0011FE88 24: 00000000 0011343A
9: 00000000 00000000 25: 00000000 00000002
10: 00000000 0011FCA0 26: 00000000 000228A0
11: 00000000 00000000 27: 00000000 00000000
12: 00000000 00000000 28: 00000000 FFB000FF
13: 00000000 00000000 29: 00000000 00124400
14: 00000000 00000000 30: 00000000 00124400
15: 00000000 00000000
Overlay name memadr topadr size ref
rawhide 1a000 71400 357376 0
powerup 71420 77420 24576 1
advshell a4b00 abd00 29184 1
basiccmd 990e0 a4ae0 47616 1
advcmd abd20 bcf20 70144 1
environ 7c660 83e60 30720 1
phase3 948c0 990c0 18432 1
pci 83e80 90680 51200 1
eisa 906a0 948a0 16896 1
ether dd700 e1500 15872 1
scsi ceaa0 d3ea0 21504 2
dv bcf40 bf940 10752 1
tulip d44e0 dd6e0 37376 1
diagsupport 77440 7c640 20992 1
kernel_mapsym c1560 c9960 33792 0
powerup_mapsym c9980 c9f80 1536 0
advshell_mapsym c9fa0 ca7a0 2048 0
basiccmd_mapsym ca7c0 cb1c0 2560 0
advcmd_mapsym cb1e0 cbbe0 2560 0
environ_mapsym cbc00 cca00 3584 0
phase3_mapsym cca20 cd020 1536 0
pci_mapsym cd040 cde40 3584 0
eisa_mapsym cde60 ce460 1536 0
ether_mapsym c07a0 c0ba0 1024 0
scsi_mapsym d3ec0 d44c0 1536 0
dv_mapsym bf960 bfd60 1024 0
tulip_mapsym bfd80 c0780 2560 0
diagsupport_mapsym ce480 cea80 1536 0
dump of active call frames:
PC = 55555558
PD = 00057D00 (DRIVER_SET)
FP = 00124400
SP = 00124400
R2 R3 R4 R29 saved starting at 00124408
R2 = 00057E60
R3 = 001152A0
R4 = 00000000
R29 = 00124430
PC = 000200F8
PD = 00057E60 (POLL_UNITS_UNDER_IOD)
FP = 00124430
SP = 00124430
R2 R3 R4 R5 R6 R7 R8 R9 R10 R29 saved starting at 00124438
R2 = 00057F00
R3 = 00000000
R4 = 00000003
R5 = 00000002
R6 = 00000001
R7 = 0001CDB8
R8 = 0001CDC8
R9 = 0001CDB8
R10 = 00000000
R29 = 00124490
PC = 0001FDC0
PD = 00057F00 (POLL_UNITS)
FP = 00124490
SP = 00124490
R2 R3 R4 R5 R6 R7 R8 R9 R29 saved starting at 00124498
R2 = 00057FB8
R3 = 0005529C
R4 = 0001CC98
R5 = 00000000
R6 = 00000000
R7 = 00000000
R8 = 00000000
R9 = 00000000
R29 = 00124530
PC = 00022720
PD = 00057FB8 (CONFIGURE_IO_ADAPTERS)
FP = 00124530
SP = 001244F0
R2 R3 R4 R29 saved starting at 00124560
R2 = 0005C8A0
R3 = 001223E0
R4 = 001225B0
R29 = 00124590
PC = 00036EA4
PD = 0005C8A0 (KRN$_PROCESS)
FP = 00124590
SP = 00124550
R2 R3 R4 R29 saved starting at 00124598
R2 = 00000000
R3 = 00000000
R4 = 00000000
R29 = 00000000
breakpoint at PC 69180 desired, XDELTA not loaded
access violation fault
PCB = 001223E0 (config_adap)
PC = 55555555 5555555C
VA = 55555555 5555555C
exception context saved starting at 001242C0
GPRs:
0: 00000000 00000001 16: 00000000 00000004
1: 00000000 00000001 17: 00000000 0011FCA0
2: 00000000 00057D00 18: 00000000 0008BC30
3: 00000000 00000004 19: 00000000 00000025
4: 00000000 0011FCA0 20: 00000000 001387C0
5: 00000000 00000003 21: 00000000 00000000
6: 00000000 00000002 22: 00000000 00054850
7: 00000000 00000002 23: 00000000 00000001
8: 00000000 0011FE88 24: 00000000 0011343A
9: 00000000 00000000 25: 00000000 00000002
10: 00000000 0011FCA0 26: 00000000 000228A0
11: 00000000 00000000 27: 00000000 00000000
12: 00000000 00000000 28: 00000000 FFB000FF
13: 00000000 00000000 29: 00000000 00124400
14: 00000000 00000000 30: 00000000 00124400
15: 00000000 00000000
Overlay name memadr topadr size ref
rawhide 1a000 71400 357376 0
powerup 71420 77420 24576 1
advshell a4b00 abd00 29184 1
basiccmd 990e0 a4ae0 47616 1
advcmd abd20 bcf20 70144 1
environ 7c660 83e60 30720 1
phase3 948c0 990c0 18432 1
pci 83e80 90680 51200 1
eisa 906a0 948a0 16896 1
ether dd700 e1500 15872 1
scsi ceaa0 d3ea0 21504 2
dv bcf40 bf940 10752 1
tulip d44e0 dd6e0 37376 1
diagsupport 77440 7c640 20992 1
kernel_mapsym c1560 c9960 33792 0
powerup_mapsym c9980 c9f80 1536 0
advshell_mapsym c9fa0 ca7a0 2048 0
basiccmd_mapsym ca7c0 cb1c0 2560 0
advcmd_mapsym cb1e0 cbbe0 2560 0
environ_mapsym cbc00 cca00 3584 0
phase3_mapsym cca20 cd020 1536 0
pci_mapsym cd040 cde40 3584 0
eisa_mapsym cde60 ce460 1536 0
ether_mapsym c07a0 c0ba0 1024 0
scsi_mapsym d3ec0 d44c0 1536 0
dv_mapsym bf960 bfd60 1024 0
tulip_mapsym bfd80 c0780 2560 0
diagsupport_mapsym ce480 cea80 1536 0
dump of active call frames:
PC = 5555555C
PD = 00057D00 (DRIVER_SET)
FP = 00124400
SP = 00124400
R2 R3 R4 R29 saved starting at 00124408
R2 = 00057E60
R3 = 001152A0
R4 = 00000000
R29 = 00124430
PC = 000200F8
PD = 00057E60 (POLL_UNITS_UNDER_IOD)
FP = 00124430
SP = 00124430
R2 R3 R4 R5 R6 R7 R8 R9 R10 R29 saved starting at 00124438
R2 = 00057F00
R3 = 00000000
R4 = 00000003
R5 = 00000002
R6 = 00000001
R7 = 0001CDB8
R8 = 0001CDC8
R9 = 0001CDB8
R10 = 00000000
R29 = 00124490
PC = 0001FDC0
PD = 00057F00 (POLL_UNITS)
FP = 00124490
SP = 00124490
R2 R3 R4 R5 R6 R7 R8 R9 R29 saved starting at 00124498
R2 = 00057FB8
R3 = 0005529C
R4 = 0001CC98
R5 = 00000000
R6 = 00000000
R7 = 00000000
R8 = 00000000
R9 = 00000000
R29 = 00124530
PC = 00022720
PD = 00057FB8 (CONFIGURE_IO_ADAPTERS)
FP = 00124530
SP = 001244F0
R2 R3 R4 R29 saved starting at 00124560
R2 = 0005C8A0
R3 = 001223E0
R4 = 001225B0
R29 = 00124590
PC = 00036EA4
PD = 0005C8A0 (KRN$_PROCESS)
FP = 00124590
SP = 00124550
R2 R3 R4 R29 saved starting at 00124598
R2 = 00000000
R3 = 00000000
R4 = 00000000
R29 = 00000000
breakpoint at PC 69180 desired, XDELTA not loaded
access violation fault
PCB = 001223E0 (config_adap)
PC = 55555555 55555560
VA = 55555555 55555560
exception context saved starting at 001242C0
GPRs:
0: 00000000 00000001 16: 00000000 00000004
1: 00000000 00000001 17: 00000000 0011FCA0
2: 00000000 00057D00 18: 00000000 0008BC30
3: 00000000 00000004 19: 00000000 00000025
4: 00000000 0011FCA0 20: 00000000 001387C0
5: 00000000 00000003 21: 00000000 00000000
6: 00000000 00000002 22: 00000000 00054850
7: 00000000 00000002 23: 00000000 00000001
8: 00000000 0011FE88 24: 00000000 0011343A
9: 00000000 00000000 25: 00000000 00000002
10: 00000000 0011FCA0 26: 00000000 000228A0
11: 00000000 00000000 27: 00000000 00000000
12: 00000000 00000000 28: 00000000 FFB000FF
13: 00000000 00000000 29: 00000000 00124400
14: 00000000 00000000 30: 00000000 00124400
15: 00000000 00000000
Overlay name memadr topadr size ref
rawhide 1a000 71400 357376 0
powerup 71420 77420 24576 1
advshell a4b00 abd00 29184 1
basiccmd 990e0 a4ae0 47616 1
advcmd abd20 bcf20 70144 1
environ 7c660 83e60 30720 1
phase3 948c0 990c0 18432 1
pci 83e80 90680 51200 1
eisa 906a0 948a0 16896 1
ether dd700 e1500 15872 1
scsi ceaa0 d3ea0 21504 2
dv bcf40 bf940 10752 1
tulip d44e0 dd6e0 37376 1
diagsupport 77440 7c640 20992 1
kernel_mapsym c1560 c9960 33792 0
powerup_mapsym c9980 c9f80 1536 0
advshell_mapsym c9fa0 ca7a0 2048 0
basiccmd_mapsym ca7c0 cb1c0 2560 0
advcmd_mapsym cb1e0 cbbe0 2560 0
environ_mapsym cbc00 cca00 3584 0
phase3_mapsym cca20 cd020 1536 0
pci_mapsym cd040 cde40 3584 0
eisa_mapsym cde60 ce460 1536 0
ether_mapsym c07a0 c0ba0 1024 0
scsi_mapsym d3ec0 d44c0 1536 0
dv_mapsym bf960 bfd60 1024 0
tulip_mapsym bfd80 c0780 2560 0
diagsupport_mapsym ce480 cea80 1536 0
dump of active call frames:
PC = 55555560
PD = 00057D00 (DRIVER_SET)
FP = 00124400
SP = 00124400
R2 R3 R4 R29 saved starting at 00124408
R2 = 00057E60
R3 = 001152A0
R4 = 00000000
R29 = 00124430
PC = 000200F8
PD = 00057E60 (POLL_UNITS_UNDER_IOD)
FP = 00124430
SP = 00124430
R2 R3 R4 R5 R6 R7 R8 R9 R10 R29 saved starting at 00124438
R2 = 00057F00
R3 = 00000000
R4 = 00000003
R5 = 00000002
R6 = 00000001
R7 = 0001CDB8
R8 = 0001CDC8
R9 = 0001CDB8
R10 = 00000000
R29 = 00124490
PC = 0001FDC0
PD = 00057F00 (POLL_UNITS)
FP = 00124490
SP = 00124490
R2 R3 R4 R5 R6 R7 R8 R9 R29 saved starting at 00124498
R2 = 00057FB8
R3 = 0005529C
R4 = 0001CC98
R5 = 00000000
R6 = 00000000
R7 = 00000000
R8 = 00000000
R9 = 00000000
R29 = 00124530
PC = 00022720
PD = 00057FB8 (CONFIGURE_IO_ADAPTERS)
FP = 00124530
SP = 001244F0
R2 R3 R4 R29 saved starting at 00124560
R2 = 0005C8A0
R3 = 001223E0
R4 = 001225B0
R29 = 00124590
PC = 00036EA4
PD = 0005C8A0 (KRN$_PROCESS)
FP = 00124590
SP = 00124550
R2 R3 R4 R29 saved starting at 00124598
R2 = 00000000
R3 = 00000000
R4 = 00000000
R29 = 00000000
breakpoint at PC 69180 desired, XDELTA not loaded
access violation fault
PCB = 001223E0 (config_adap)
PC = 55555555 55555564
VA = 55555555 55555564
exception context saved starting at 001242C0
GPRs:
0: 00000000 00000001 16: 00000000 00000004
1: 00000000 00000001 17: 00000000 0011FCA0
2: 00000000 00057D00 18: 00000000 0008BC30
3: 00000000 00000004 19: 00000000 00000025
4: 00000000 0011FCA0 20: 00000000 001387C0
5: 00000000 00000003 21: 00000000 00000000
6: 00000000 00000002 22: 00000000 00054850
7: 00000000 00000002 23: 00000000 00000001
8: 00000000 0011FE88 24: 00000000 0011343A
9: 00000000 00000000 25: 00000000 00000002
10: 00000000 0011FCA0 26: 00000000 000228A0
11: 00000000 00000000 27: 00000000 00000000
12: 00000000 00000000 28: 00000000 FFB000FF
13: 00000000 00000000 29: 00000000 00124400
14: 00000000 00000000 30: 00000000 00124400
15: 00000000 00000000
Overlay name memadr topadr size ref
rawhide 1a000 71400 357376 0
powerup 71420 77420 24576 1
advshell a4b00 abd00 29184 1
basiccmd 990e0 a4ae0 47616 1
advcmd abd20 bcf20 70144 1
environ 7c660 83e60 30720 1
phase3 948c0 990c0 18432 1
pci 83e80 90680 51200 1
eisa 906a0 948a0 16896 1
ether dd700 e1500 15872 1
scsi ceaa0 d3ea0 21504 2
dv bcf40 bf940 10752 1
tulip d44e0 dd6e0 37376 1
diagsupport 77440 7c640 20992 1
kernel_mapsym c1560 c9960 33792 0
powerup_mapsym c9980 c9f80 1536 0
advshell_mapsym c9fa0 ca7a0 2048 0
basiccmd_mapsym ca7c0 cb1c0 2560 0
advcmd_mapsym cb1e0 cbbe0 2560 0
environ_mapsym cbc00 cca00 3584 0
phase3_mapsym cca20 cd020 1536 0
pci_mapsym cd040 cde40 3584 0
eisa_mapsym cde60 ce460 1536 0
ether_mapsym c07a0 c0ba0 1024 0
scsi_mapsym d3ec0 d44c0 1536 0
dv_mapsym bf960 bfd60 1024 0
tulip_mapsym bfd80 c0780 2560 0
diagsupport_mapsym ce480 cea80 1536 0
dump of active call frames:
PC = 55555564
PD = 00057D00 (DRIVER_SET)
FP = 00124400
SP = 00124400
R2 R3 R4 R29 saved starting at 00124408
R2 = 00057E60
R3 = 001152A0
R4 = 00000000
R29 = 00124430
PC = 000200F8
PD = 00057E60 (POLL_UNITS_UNDER_IOD)
FP = 00124430
SP = 00124430
R2 R3 R4 R5 R6 R7 R8 R9 R10 R29 saved starting at 00124438
R2 = 00057F00
R3 = 00000000
R4 = 00000003
R5 = 00000002
R6 = 00000001
R7 = 0001CDB8
R8 = 0001CDC8
R9 = 0001CDB8
R10 = 00000000
R29 = 00124490
PC = 0001FDC0
PD = 00057F00 (POLL_UNITS)
FP = 00124490
SP = 00124490
R2 R3 R4 R5 R6 R7 R8 R9 R29 saved starting at 00124498
R2 = 00057FB8
R3 = 0005529C
R4 = 0001CC98
R5 = 00000000
R6 = 00000000
R7 = 00000000
R8 = 00000000
R9 = 00000000
R29 = 00124530
PC = 00022720
PD = 00057FB8 (CONFIGURE_IO_ADAPTERS)
FP = 00124530
SP = 001244F0
R2 R3 R4 R29 saved starting at 00124560
R2 = 0005C8A0
R3 = 001223E0
R4 = 001225B0
R29 = 00124590
PC = 00036EA4
PD = 0005C8A0 (KRN$_PROCESS)
FP = 00124590
SP = 00124550
R2 R3 R4 R29 saved starting at 00124598
R2 = 00000000
R3 = 00000000
R4 = 00000000
R29 = 00000000
breakpoint at PC 69180 desired, XDELTA not loaded
access violation fault
PCB = 001223E0 (config_adap)
PC = 55555555 55555568
VA = 55555555 55555568
exception context saved starting at 001242C0
GPRs:
0: 00000000 00000001 16: 00000000 00000004
1: 00000000 00000001 17: 00000000 0011FCA0
2: 00000000 00057D00 18: 00000000 0008BC30
3: 00000000 00000004 19: 00000000 00000025
4: 00000000 0011FCA0 20: 00000000 001387C0
5: 00000000 00000003 21: 00000000 00000000
6: 00000000 00000002 22: 00000000 00054850
7: 00000000 00000002 23: 00000000 00000001
8: 00000000 0011FE88 24: 00000000 0011343A
9: 00000000 00000000 25: 00000000 00000002
10: 00000000 0011FCA0 26: 00000000 000228A0
11: 00000000 00000000 27: 00000000 00000000
12: 00000000 00000000 28: 00000000 FFB000FF
13: 00000000 00000000 29: 00000000 00124400
14: 00000000 00000000 30: 00000000 00124400
15: 00000000 00000000
Overlay name memadr topadr size ref
rawhide 1a000 71400 357376 0
powerup 71420 77420 24576 1
advshell a4b00 abd00 29184 1
basiccmd 990e0 a4ae0 47616 1
advcmd abd20 bcf20 70144 1
environ 7c660 83e60 30720 1
phase3 948c0 990c0 18432 1
pci 83e80 90680 51200 1
eisa 906a0 948a0 16896 1
ether dd700 e1500 15872 1
scsi ceaa0 d3ea0 21504 2
dv bcf40 bf940 10752 1
tulip d44e0 dd6e0 37376 1
diagsupport 77440 7c640 20992 1
kernel_mapsym c1560 c9960 33792 0
powerup_mapsym c9980 c9f80 1536 0
advshell_mapsym c9fa0 ca7a0 2048 0
basiccmd_mapsym ca7c0 cb1c0 2560 0
advcmd_mapsym cb1e0 cbbe0 2560 0
environ_mapsym cbc00 cca00 3584 0
phase3_mapsym cca20 cd020 1536 0
pci_mapsym cd040 cde40 3584 0
eisa_mapsym cde60 ce460 1536 0
ether_mapsym c07a0 c0ba0 1024 0
scsi_mapsym d3ec0 d44c0 1536 0
dv_mapsym bf960 bfd60 1024 0
tulip_mapsym bfd80 c0780 2560 0
diagsupport_mapsym ce480 cea80 1536 0
dump of active call frames:
PC = 55555568
PD = 00057D00 (DRIVER_SET)
FP = 00124400
SP = 00124400
R2 R3 R4 R29 saved starting at 00124408
R2 = 00057E60
R3 = 001152A0
R4 = 00000000
R29 = 00124430
PC = 000200F8
PD = 00057E60 (POLL_UNITS_UNDER_IOD)
FP = 00124430
SP = 00124430
R2 R3 R4 R5 R6 R7 R8 R9 R10 R29 saved starting at 00124438
R2 = 00057F00
R3 = 00000000
R4 = 00000003
R5 = 00000002
R6 = 00000001
R7 = 0001CDB8
R8 = 0001CDC8
R9 = 0001CDB8
R10 = 00000000
R29 = 00124490
PC = 0001FDC0
PD = 00057F00 (POLL_UNITS)
FP = 00124490
SP = 00124490
R2 R3 R4 R5 R6 R7 R8 R9 R29 saved starting at 00124498
R2 = 00057FB8
R3 = 0005529C
R4 = 0001CC98
R5 = 00000000
R6 = 00000000
R7 = 00000000
R8 = 00000000
R9 = 00000000
R29 = 00124530
PC = 00022720
PD = 00057FB8 (CONFIGURE_IO_ADAPTERS)
FP = 00124530
SP = 001244F0
R2 R3 R4 R29 saved starting at 00124560
R2 = 0005C8A0
R3 = 001223E0
R4 = 001225B0
R29 = 00124590
PC = 00036EA4
PD = 0005C8A0 (KRN$_PROCESS)
FP = 00124590
SP = 00124550
R2 R3 R4 R29 saved starting at 00124598
R2 = 00000000
R3 = 00000000
R4 = 00000000
R29 = 00000000
breakpoint at PC 69180 desired, XDELTA not loaded
access violation fault
PCB = 001223E0 (config_adap)
PC = 55555555 5555556C
VA = 55555555 5555556C
exception context saved starting at 001242C0
GPRs:
0: 00000000 00000001 16: 00000000 00000004
1: 00000000 00000001 17: 00000000 0011FCA0
2: 00000000 00057D00 18: 00000000 0008BC30
3: 00000000 00000004 19: 00000000 00000025
4: 00000000 0011FCA0 20: 00000000 001387C0
5: 00000000 00000003 21: 00000000 00000000
6: 00000000 00000002 22: 00000000 00054850
7: 00000000 00000002 23: 00000000 00000001
8: 00000000 0011FE88 24: 00000000 0011343A
9: 00000000 00000000 25: 00000000 00000002
10: 00000000 0011FCA0 26: 00000000 000228A0
11: 00000000 00000000 27: 00000000 00000000
12: 00000000 00000000 28: 00000000 FFB000FF
13: 00000000 00000000 29: 00000000 00124400
14: 00000000 00000000 30: 00000000 00124400
15: 00000000 00000000
Overlay name memadr topadr size ref
rawhide 1a000 71400 357376 0
powerup 71420 77420 24576 1
advshell a4b00 abd00 29184 1
basiccmd 990e0 a4ae0 47616 1
advcmd abd20 bcf20 70144 1
environ 7c660 83e60 30720 1
phase3 948c0 990c0 18432 1
pci 83e80 90680 51200 1
eisa 906a0 948a0 16896 1
ether dd700 e1500 15872 1
scsi ceaa0 d3ea0 21504 2
dv bcf40 bf940 10752 1
tulip d44e0 dd6e0 37376 1
diagsupport 77440 7c640 20992 1
kernel_mapsym c1560 c9960 33792 0
powerup_mapsym c9980 c9f80 1536 0
advshell_mapsym c9fa0 ca7a0 2048 0
basiccmd_mapsym ca7c0 cb1c0 2560 0
advcmd_mapsym cb1e0 cbbe0 2560 0
environ_mapsym cbc00 cca00 3584 0
phase3_mapsym cca20 cd020 1536 0
pci_mapsym cd040 cde40 3584 0
eisa_mapsym cde60 ce460 1536 0
ether_mapsym c07a0 c0ba0 1024 0
scsi_mapsym d3ec0 d44c0 1536 0
dv_mapsym bf960 bfd60 1024 0
tulip_mapsym bfd80 c0780 2560 0
diagsupport_mapsym ce480 cea80 1536 0
dump of active call frames:
PC = 5555556C
PD = 00057D00 (DRIVER_SET)
FP = 00124400
SP = 00124400
R2 R3 R4 R29 saved starting at 00124408
R2 = 00057E60
R3 = 001152A0
R4 = 00000000
R29 = 00124430
PC = 000200F8
PD = 00057E60 (POLL_UNITS_UNDER_IOD)
FP = 00124430
SP = 00124430
R2 R3 R4 R5 R6 R7 R8 R9 R10 R29 saved starting at 00124438
R2 = 00057F00
R3 = 00000000
R4 = 00000003
R5 = 00000002
R6 = 00000001
R7 = 0001CDB8
R8 = 0001CDC8
R9 = 0001CDB8
R10 = 00000000
R29 = 00124490
PC = 0001FDC0
PD = 00057F00 (POLL_UNITS)
FP = 00124490
SP = 00124490
R2 R3 R4 R5 R6 R7 R8 R9 R29 saved starting at 00124498
R2 = 00057FB8
R3 = 0005529C
R4 = 0001CC98
R5 = 00000000
R6 = 00000000
R7 = 00000000
R8 = 00000000
R9 = 00000000
R29 = 00124530
PC = 00022720
PD = 00057FB8 (CONFIGURE_IO_ADAPTERS)
FP = 00124530
SP = 001244F0
R2 R3 R4 R29 saved starting at 00124560
R2 = 0005C8A0
R3 = 001223E0
R4 = 001225B0
R29 = 00124590
PC = 00036EA4
PD = 0005C8A0 (KRN$_PROCESS)
FP = 00124590
SP = 00124550
R2 R3 R4 R29 saved starting at 00124598
R2 = 00000000
R3 = 00000000
R4 = 00000000
R29 = 00000000
breakpoint at PC 69180 desired, XDELTA not loaded
access violation fault
PCB = 001223E0 (config_adap)
PC = 55555555 55555570
VA = 55555555 55555570
exception context saved starting at 001242C0
GPRs:
0: 00000000 00000001 16: 00000000 00000004
1: 00000000 00000001 17: 00000000 0011FCA0
2: 00000000 00057D00 18: 00000000 0008BC30
3: 00000000 00000004 19: 00000000 00000025
4: 00000000 0011FCA0 20: 00000000 001387C0
5: 00000000 00000003 21: 00000000 00000000
6: 00000000 00000002 22: 00000000 00054850
7: 00000000 00000002 23: 00000000 00000001
8: 00000000 0011FE88 24: 00000000 0011343A
9: 00000000 00000000 25: 00000000 00000002
10: 00000000 0011FCA0 26: 00000000 000228A0
11: 00000000 00000000 27: 00000000 00000000
12: 00000000 00000000 28: 00000000 FFB000FF
13: 00000000 00000000 29: 00000000 00124400
14: 00000000 00000000 30: 00000000 00124400
15: 00000000 00000000
Overlay name memadr topadr size ref
rawhide 1a000 71400 357376 0
powerup 71420 77420 24576 1
advshell a4b00 abd00 29184 1
basiccmd 990e0 a4ae0 47616 1
advcmd abd20 bcf20 70144 1
environ 7c660 83e60 30720 1
phase3 948c0 990c0 18432 1
pci 83e80 90680 51200 1
eisa 906a0 948a0 16896 1
ether dd700 e1500 15872 1
scsi ceaa0 d3ea0 21504 2
dv bcf40 bf940 10752 1
tulip d44e0 dd6e0 37376 1
diagsupport 77440 7c640 20992 1
kernel_mapsym c1560 c9960 33792 0
powerup_mapsym c9980 c9f80 1536 0
advshell_mapsym c9fa0 ca7a0 2048 0
basiccmd_mapsym ca7c0 cb1c0 2560 0
advcmd_mapsym cb1e0 cbbe0 2560 0
environ_mapsym cbc00 cca00 3584 0
phase3_mapsym cca20 cd020 1536 0
pci_mapsym cd040 cde40 3584 0
eisa_mapsym cde60 ce460 1536 0
ether_mapsym c07a0 c0ba0 1024 0
scsi_mapsym d3ec0 d44c0 1536 0
dv_mapsym bf960 bfd60 1024 0
tulip_mapsym bfd80 c0780 2560 0
diagsupport_mapsym ce480 cea80 1536 0
dump of active call frames:
PC = 55555570
PD = 00057D00 (DRIVER_SET)
FP = 00124400
SP = 00124400
R2 R3 R4 R29 saved starting at 00124408
R2 = 00057E60
R3 = 001152A0
R4 = 00000000
R29 = 00124430
PC = 000200F8
PD = 00057E60 (POLL_UNITS_UNDER_IOD)
FP = 00124430
SP = 00124430
R2 R3 R4 R5 R6 R7 R8 R9 R10 R29 saved starting at 00124438
R2 = 00057F00
R3 = 00000000
R4 = 00000003
R5 = 00000002
R6 = 00000001
R7 = 0001CDB8
R8 = 0001CDC8
R9 = 0001CDB8
R10 = 00000000
R29 = 00124490
PC = 0001FDC0
PD = 00057F00 (POLL_UNITS)
FP = 00124490
SP = 00124490
R2 R3 R4 R5 R6 R7 R8 R9 R29 saved starting at 00124498
R2 = 00057FB8
R3 = 0005529C
R4 = 0001CC98
R5 = 00000000
R6 = 00000000
R7 = 00000000
R8 = 00000000
R9 = 00000000
R29 = 00124530
PC = 00022720
PD = 00057FB8 (CONFIGURE_IO_ADAPTERS)
FP = 00124530
SP = 001244F0
R2 R3 R4 R29 saved starting at 00124560
R2 = 0005C8A0
R3 = 001223E0
R4 = 001225B0
R29 = 00124590
PC = 00036EA4
PD = 0005C8A0 (KRN$_PROCESS)
FP = 00124590
SP = 00124550
R2 R3 R4 R29 saved starting at 00124598
R2 = 00000000
R3 = 00000000
R4 = 00000000
R29 = 00000000
breakpoint at PC 69180 desired, XDELTA not loaded
access violation fault
PCB = 001223E0 (config_adap)
PC = 55555555 55555574
VA = 55555555 55555574
exception context saved starting at 001242C0
GPRs:
0: 00000000 00000001 16: 00000000 00000004
1: 00000000 00000001 17: 00000000 0011FCA0
2: 00000000 00057D00 18: 00000000 0008BC30
3: 00000000 00000004 19: 00000000 00000025
4: 00000000 0011FCA0 20: 00000000 001387C0
5: 00000000 00000003 21: 00000000 00000000
6: 00000000 00000002 22: 00000000 00054850
7: 00000000 00000002 23: 00000000 00000001
8: 00000000 0011FE88 24: 00000000 0011343A
9: 00000000 00000000 25: 00000000 00000002
10: 00000000 0011FCA0 26: 00000000 000228A0
11: 00000000 00000000 27: 00000000 00000000
12: 00000000 00000000 28: 00000000 FFB000FF
13: 00000000 00000000 29: 00000000 00124400
14: 00000000 00000000 30: 00000000 00124400
15: 00000000 00000000
Overlay name memadr topadr size ref
rawhide 1a000 71400 357376 0
powerup 71420 77420 24576 1
advshell a4b00 abd00 29184 1
basiccmd 990e0 a4ae0 47616 1
advcmd abd20 bcf20 70144 1
environ 7c660 83e60 30720 1
phase3 948c0 990c0 18432 1
pci 83e80 90680 51200 1
eisa 906a0 948a0 16896 1
ether dd700 e1500 15872 1
scsi ceaa0 d3ea0 21504 2
dv bcf40 bf940 10752 1
tulip d44e0 dd6e0 37376 1
diagsupport 77440 7c640 20992 1
kernel_mapsym c1560 c9960 33792 0
powerup_mapsym c9980 c9f80 1536 0
advshell_mapsym c9fa0 ca7a0 2048 0
basiccmd_mapsym ca7c0 cb1c0 2560 0
advcmd_mapsym cb1e0 cbbe0 2560 0
environ_mapsym cbc00 cca00 3584 0
phase3_mapsym cca20 cd020 1536 0
pci_mapsym cd040 cde40 3584 0
eisa_mapsym cde60 ce460 1536 0
ether_mapsym c07a0 c0ba0 1024 0
scsi_mapsym d3ec0 d44c0 1536 0
dv_mapsym bf960 bfd60 1024 0
tulip_mapsym bfd80 c0780 2560 0
diagsupport_mapsym ce480 cea80 1536 0
dump of active call frames:
PC = 55555574
PD = 00057D00 (DRIVER_SET)
FP = 00124400
SP = 00124400
R2 R3 R4 R29 saved starting at 00124408
R2 = 00057E60
R3 = 001152A0
R4 = 00000000
R29 = 00124430
PC = 000200F8
PD = 00057E60 (POLL_UNITS_UNDER_IOD)
FP = 00124430
SP = 00124430
R2 R3 R4 R5 R6 R7 R8 R9 R10 R29 saved starting at 00124438
R2 = 00057F00
R3 = 00000000
R4 = 00000003
R5 = 00000002
R6 = 00000001
R7 = 0001CDB8
R8 = 0001CDC8
R9 = 0001CDB8
R10 = 00000000
R29 = 00124490
PC = 0001FDC0
PD = 00057F00 (POLL_UNITS)
FP = 00124490
SP = 00124490
R2 R3 R4 R5 R6 R7 R8 R9 R29 saved starting at 00124498
R2 = 00057FB8
R3 = 0005529C
R4 = 0001CC98
R5 = 00000000
R6 = 00000000
R7 = 00000000
R8 = 00000000
R9 = 00000000
R29 = 00124530
PC = 00022720
PD = 00057FB8 (CONFIGURE_IO_ADAPTERS)
FP = 00124530
SP = 001244F0
R2 R3 R4 R29 saved starting at 00124560
R2 = 0005C8A0
R3 = 001223E0
R4 = 001225B0
R29 = 00124590
PC = 00036EA4
PD = 0005C8A0 (KRN$_PROCESS)
FP = 00124590
SP = 00124550
R2 R3 R4 R29 saved starting at 00124598
R2 = 00000000
R3 = 00000000
R4 = 00000000
R29 = 00000000
breakpoint at PC 69180 desired, XDELTA not loaded
access violation fault
PCB = 001223E0 (config_adap)
PC = 55555555 55555578
VA = 55555555 55555578
exception context saved starting at 001242C0
GPRs:
0: 00000000 00000001 16: 00000000 00000004
1: 00000000 00000001 17: 00000000 0011FCA0
2: 00000000 00057D00 18: 00000000 0008BC30
3: 00000000 00000004 19: 00000000 00000025
4: 00000000 0011FCA0 20: 00000000 001387C0
5: 00000000 00000003 21: 00000000 00000000
6: 00000000 00000002 22: 00000000 00054850
7: 00000000 00000002 23: 00000000 00000001
8: 00000000 0011FE88 24: 00000000 0011343A
9: 00000000 00000000 25: 00000000 00000002
10: 00000000 0011FCA0 26: 00000000 000228A0
11: 00000000 00000000 27: 00000000 00000000
12: 00000000 00000000 28: 00000000 FFB000FF
13: 00000000 00000000 29: 00000000 00124400
14: 00000000 00000000 30: 00000000 00124400
15: 00000000 00000000
Overlay name memadr topadr size ref
rawhide 1a000 71400 357376 0
powerup 71420 77420 24576 1
advshell a4b00 abd00 29184 1
basiccmd 990e0 a4ae0 47616 1
advcmd abd20 bcf20 70144 1
environ 7c660 83e60 30720 1
phase3 948c0 990c0 18432 1
pci 83e80 90680 51200 1
eisa 906a0 948a0 16896 1
ether dd700 e1500 15872 1
scsi ceaa0 d3ea0 21504 2
dv bcf40 bf940 10752 1
tulip d44e0 dd6e0 37376 1
diagsupport 77440 7c640 20992 1
kernel_mapsym c1560 c9960 33792 0
powerup_mapsym c9980 c9f80 1536 0
advshell_mapsym c9fa0 ca7a0 2048 0
basiccmd_mapsym ca7c0 cb1c0 2560 0
advcmd_mapsym cb1e0 cbbe0 2560 0
environ_mapsym cbc00 cca00 3584 0
phase3_mapsym cca20 cd020 1536 0
pci_mapsym cd040 cde40 3584 0
eisa_mapsym cde60 ce460 1536 0
ether_mapsym c07a0 c0ba0 1024 0
scsi_mapsym d3ec0 d44c0 1536 0
dv_mapsym bf960 bfd60 1024 0
tulip_mapsym bfd80 c0780 2560 0
diagsupport_mapsym ce480 cea80 1536 0
dump of active call frames:
PC = 55555578
PD = 00057D00 (DRIVER_SET)
FP = 00124400
SP = 00124400
R2 R3 R4 R29 saved starting at 00124408
R2 = 00057E60
R3 = 001152A0
R4 = 00000000
R29 = 00124430
PC = 000200F8
PD = 00057E60 (POLL_UNITS_UNDER_IOD)
FP = 00124430
SP = 00124430
R2 R3 R4 R5 R6 R7 R8 R9 R10 R29 saved starting at 00124438
R2 = 00057F00
R3 = 00000000
R4 = 00000003
R5 = 00000002
R6 = 00000001
R7 = 0001CDB8
R8 = 0001CDC8
R9 = 0001CDB8
R10 = 00000000
R29 = 00124490
PC = 0001FDC0
PD = 00057F00 (POLL_UNITS)
FP = 00124490
SP = 00124490
R2 R3 R4 R5 R6 R7 R8 R9 R29 saved starting at 00124498
R2 = 00057FB8
R3 = 0005529C
R4 = 0001CC98
R5 = 00000000
R6 = 00000000
R7 = 00000000
R8 = 00000000
R9 = 00000000
R29 = 00124530
PC = 00022720
PD = 00057FB8 (CONFIGURE_IO_ADAPTERS)
FP = 00124530
SP = 001244F0
R2 R3 R4 R29 saved starting at 00124560
R2 = 0005C8A0
R3 = 001223E0
R4 = 001225B0
R29 = 00124590
PC = 00036EA4
PD = 0005C8A0 (KRN$_PROCESS)
FP = 00124590
SP = 00124550
R2 R3 R4 R29 saved starting at 00124598
R2 = 00000000
R3 = 00000000
R4 = 00000000
R29 = 00000000
breakpoint at PC 69180 desired, XDELTA not loaded
access violation fault
PCB = 001223E0 (config_adap)
PC = 55555555 5555557C
VA = 55555555 5555557C
exception context saved starting at 001242C0
GPRs:
0: 00000000 00000001 16: 00000000 00000004
1: 00000000 00000001 17: 00000000 0011FCA0
2: 00000000 00057D00 18: 00000000 0008BC30
3: 00000000 00000004 19: 00000000 00000025
4: 00000000 0011FCA0 20: 00000000 001387C0
5: 00000000 00000003 21: 00000000 00000000
6: 00000000 00000002 22: 00000000 00054850
7: 00000000 00000002 23: 00000000 00000001
8: 00000000 0011FE88 24: 00000000 0011343A
9: 00000000 00000000 25: 00000000 00000002
10: 00000000 0011FCA0 26: 00000000 000228A0
11: 00000000 00000000 27: 00000000 00000000
12: 00000000 00000000 28: 00000000 FFB000FF
13: 00000000 00000000 29: 00000000 00124400
14: 00000000 00000000 30: 00000000 00124400
15: 00000000 00000000
Overlay name memadr topadr size ref
rawhide 1a000 71400 357376 0
powerup 71420 77420 24576 1
advshell a4b00 abd00 29184 1
basiccmd 990e0 a4ae0 47616 1
advcmd abd20 bcf20 70144 1
environ 7c660 83e60 30720 1
phase3 948c0 990c0 18432 1
pci 83e80 90680 51200 1
eisa 906a0 948a0 16896 1
ether dd700 e1500 15872 1
scsi ceaa0 d3ea0 21504 2
dv bcf40 bf940 10752 1
tulip d44e0 dd6e0 37376 1
diagsupport 77440 7c640 20992 1
kernel_mapsym c1560 c9960 33792 0
powerup_mapsym c9980 c9f80 1536 0
advshell_mapsym c9fa0 ca7a0 2048 0
basiccmd_mapsym ca7c0 cb1c0 2560 0
advcmd_mapsym cb1e0 cbbe0 2560 0
environ_mapsym cbc00 cca00 3584 0
phase3_mapsym ?øø
SROM V3.0 on cpu0
SROM V3.0 on cpu1
XSROM V6.0 on cpu0
XSROM V6.0 on cpu1
BCache testing complete on cpu0
BCache testing complete on cpu1
mem_pair0 - 256 MB
mem_pair1 - 256 MB
mem_pair2 - 256 MB
mem_pair3 - 256 MB
mem_pair4 - 64 MB
mem_pair5 - 64 MB
20..20..21..21..23..
please wait 30 seconds for T24 to complete
24..24..
Memory testing complete on cpu1
Memory testing complete on cpu0
starting console on CPU 0
sizing memory
0 256 MB DIMM
1 256 MB DIMM
2 256 MB DIMM
3 256 MB DIMM
4 64 MB DIMM
5 64 MB DIMM
starting console on CPU 1
probing IOD1 hose 1
bus 0 slot 1 - NCR 53C810
bus 0 slot 2 - QLogic ISP10X0
probing IOD0 hose 0
bus 0 slot 1 - PCEB
probing EISA Bridge, bus 1
bus 0 slot 3 - DECchip 21140-AA
bus 0 slot 4 - DE500-BA
configuring I/O adapters...
ncr0, hose 1, bus 0, slot 1
isp0, hose 1, bus 0, slot 2
floppy0, hose 0, bus 1, slot 0
tulip0, hose 0, bus 0, slot 3
tulip1, hose 0, bus 0, slot 4
System temperature is 24 degrees C
AlphaServer 1200 Console V6.0-4, 10-MAY-2001 10:11:42
CPU 0 booting
(boot dkb0.0.0.2.1 -flags a)
block 0 of dkb0.0.0.2.1 is a valid boot block
reading 16 blocks from dkb0.0.0.2.1
bootstrap code read in
Building FRU table
base = 200000, image_start = 0, image_bytes = 2000
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Digital UNIX boot - Thu Jan 11 14:49:49 EST 2001
Loading vmunix ...
Loading at 0xfffffc0000230000
Current PAL Revision <0x4000200010115>
Switching to OSF PALcode Succeeded
New PAL Revision <0x4000200020117>
Sizes:
text = 3533280
data = 580656
bss = 1017664
Starting at 0xfffffc0000488330
Alpha boot: available memory from 0x10aa000 to 0xa3ffa000
Digital UNIX V4.0F (Rev. 1229); Fri Nov 16 22:41:19 MET 2001
physical memory = 1152.00 megabytes.
available memory = 1121.51 megabytes.
using 4415 buffers containing 34.49 megabytes of memory
Master cpu at slot 0.
Firmware revision: 6.0
PALcode: Digital UNIX version 1.23
AlphaServer 1200 5/533 4MB
pci1 at mcbus0 slot 5
psiop0 at pci1 slot 1
Loading SIOP: script c0000500, reg 7feef00, data c000a4b8
scsi0 at psiop0 slot 0
rz5 at scsi0 target 5 lun 0 (LID=0) (DEC RRD46 (C) DEC 1337)
isp0 at pci1 slot 2
show dev
polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1 ð SCSI Bus ID 7
dka500.5.0.1.1 DKA500 RRD46 1337
polling isp0 (QLogic ISP10X0) slot 2, bus 0 PCI, hose 1 SCSI Bus ID 7
dkb0.0.0.2.1 DKB0 RZ1DF-CB 0372
dkb100.1.0.2.1 DKB100 IBM DRHS36V 0110
dkb200.2.0.2.1 DKB200 SEAGATE ST336704LC 0002
dkb300.3.0.2.1 DKB300 SEAGATE ST336704LC 0004
dkb400.4.0.2.1 DKB400 SEAGATE ST336705LC 5063
mkb600.6.0.2.1 MKB600 HP C5683A C908
polling floppy0 (FLOPPY) PCEB - XBUS hose 0
dva0.0.0.1000.0 DVA0 RX23
polling tulip0 (DECchip 21140-AA) slot 3, bus 0 PCI, hose 0
ewa0.0.0.3.0 00-00-F8-1B-08-40 FastFD (Full Duplex)
polling tulip1 (DE500-BA) slot 4, bus 0 PCI, hose 0
ewb0.0.0.4.0 08-00-2B-C3-84-D6 FastFD (Full Duplex)
P00>>>show ewa*
ewa0_loop_count 3e8
ewa0_loop_inc a
ewa0_loop_patt ffffffff
ewa0_loop_size 2e
ewa0_lp_msg_node 1
ewa0_mode FastFD (Full Duplex)
P00>>>show ewb*
ewb0_loop_count 3e8
ewb0_loop_inc a
ewb0_loop_patt ffffffff
ewb0_loop_size 2e
ewb0_lp_msg_node 1
ewb0_mode FastFD (Full Duplex)
P00>>>ÿðü
SROM V3.0 on cpu0
SROM V3.0 on cpu1
XSROM V6.0 on cpu0
XSROM V6.0 on cpu1
BCache testing complete on cpu0
BCache testing complete on cpu1
mem_pair0 - 256 MB
mem_pair1 - 256 MB
mem_pair2 - 256 MB
mem_pair3 - 256 MB
mem_pair4 - 64 MB
mem_pair5 - 64 MB
20..20..21..21..23..
please wait 30 seconds for T24 to complete
24..24..
Memory testing complete on cpu1
Memory testing complete on cpu0
starting console on CPU 0
sizing memory
0 256 MB DIMM
1 256 MB DIMM
2 256 MB DIMM
3 256 MB DIMM
4 64 MB DIMM
5 64 MB DIMM
starting console on CPU 1
probing IOD1 hose 1
bus 0 slot 1 - NCR 53C810
bus 0 slot 2 - QLogic ISP10X0
probing IOD0 hose 0
bus 0 slot 1 - PCEB
probing EISA Bridge, bus 1
bus 0 slot 3 - DECchip 21140-AA
bus 0 slot 4 - DE500-BA
configuring I/O adapters...
ncr0, hose 1, bus 0, slot 1
isp0, hose 1, bus 0, slot 2
floppy0, hose 0, bus 1, slot 0
tulip0, hose 0, bus 0, slot 3
tulip1, hose 0, bus 0, slot 4
System temperature is 24 degrees C
AlphaServer 1200 Console V6.0-4, 10-MAY-2001 10:11:42
CPU 0 booting
(boot dkb0.0.0.2.1 -flags a)
block 0 of dkb0.0.0.2.1 is a valid boot block
reading 16 blocks from dkb0.0.0.2.1
bootstrap code read in
Building FRU table
base = 200000, image_start = 0, image_bytes = 2000
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Digital UNIX boot - Thu Jan 11 14:49:49 EST 2001
Loading vmunix ...
Loading at 0xfffffc0000230000
Current PAL Revision <0x4000200010115>
Switching to OSF PALcode Succeeded
New PAL Revision <0x4000200020117>
Sizes:
text = 3533280
data = 580656
bss = 1017664
Starting at 0xfffffc0000488330
Alpha boot: available memory from 0x10aa000 to 0xa3ffa000
Digital UNIX V4.0F (Rev. 1229); Fri Nov 16 22:41:19 MET 2001
physical memory = 1152.00 megabytes.
available memory = 1121.51 megabytes.
using 4415 buffers containing 34.49 megabytes of memory
Master cpu at slot 0.
Firmware revision: 6.0
PALcode: Digital UNIX version 1.23
AlphaServer 1200 5/533 4MB
pci1 at mcbus0 slot 5
psiop0 at pci1 slot 1
Loading SIOP: script c0000500, reg 7feef00, data c000a4b8
scsi0 at psiop0 slot 0
rz5 at scsi0 target 5 lun 0 (LID=0) (DEC RRD46 (C) DEC 1337)
isp0 at pci1 slot 2
isp0: QLOGIC ISP1040B/V2
isp0: Firmware revision 5.57 (loaded by console)
isp0: Fast RAM timing enabled.
scsi1 at isp0 slot 0
rz8 at scsi1 target 0 lun 0 (LID=1) (DEC RZ1DF-CB (C) DEC 0372) (Wide16)
rz9 at scsi1 target 1 lun 0 (LID=2) (IBM DRHS36V 0110) (Wide16)
rz10 at scsi1 target 2 lun 0 (LID=3) (SEAGATE ST336704LC 0002) (Wide16)
rz11 at scsi1 target 3 lun 0 (LID=4) (SEAGATE ST336704LC 0004) (Wide16)
rz12 at scsi1 target 4 lun 0 (LID=5) (SEAGATE ST336705LC 5063) (Wide16)
tz14 at scsi1 target 6 lun 0 (LID=6) (HP C5683A C908) (Wide16)
gpc0 at eisa0
pci0 at mcbus0 slot 4
eisa0 at pci0
ace0 at eisa0
ace1 at eisa0
lp0 at eisa0
fdi0 at eisa0
fd0 at fdi0 unit 0
tu0: DECchip 21140: Revision: 2.2
tu0: auto negotiation capable device
tu0 at pci0 slot 3
tu0: DEC TULIP (10/100) Ethernet Interface, hardware address: 00-00-F8-1B-08-40
tu0: auto negotiation off: selecting 100BaseTX (UTP) port: full duplex
tu1: DECchip 21143: Revision: 3.0
tu1: auto negotiation capable device
tu1 at pci0 slot 4
tu1: DEC TULIP (10/100) Ethernet Interface, hardware address: 08-00-2B-C3-84-D6
tu1: auto negotiation off: selecting 100BaseTX (UTP) port: full duplex
Created FRU table binary error log packet
kernel console: ace0
dli: configured
i2c: Server Management Hardware Present
ADVFS: using 12266 buffers containing 95.82 megabytes of memory
Starting secondary cpu 1
Checking local filesystems
/sbin/ufs_fsck -p
Mounting / (root)
user_cfg_pt: reconfigured
Mounting local filesystems
exec: /sbin/mount_advfs -F 81920 rootdmn#root /
rootdmn#root on / type advfs (rw)
exec: /sbin/mount_advfs -F 16384 sysdmn#tmp /tmp
sysdmn#tmp on /tmp type advfs (rw)
exec: /sbin/mount_advfs -F 16384 sysdmn#usr /usr
sysdmn#usr on /usr type advfs (rw)
exec: /sbin/mount_advfs -F 16384 sysdmn#var /usr/var
sysdmn#var on /usr/var type advfs (rw)
exec: /sbin/mount_advfs -F 16384 sysdmn#backup /usr/var/backup
sysdmn#backup on /usr/var/backup type advfs (rw)
exec: /sbin/mount_advfs -F 16384 ctmp#ctmp /ctmp
ctmp#ctmp on /ctmp type advfs (rw)
SCSI logical disk 0: using ULTRIX partition info found on disk.
/dev/rz5c on /usr/share/doclib/ODL/U98Q3_1 type ufs (ro)
exec: /sbin/mount_advfs -F 16384 pc-people#pc-fif /home/pc-fif
pc-people#pc-fif on /home/pc-fif type advfs (rw)
exec: /sbin/mount_advfs -F 16384 worker#workers /home/workers
worker#workers on /home/workers type advfs (rw)
exec: /sbin/mount_advfs -F 16384 pdmn#projekte /Projekte
pdmn#projekte on /Projekte type advfs (rw)
/proc on /proc type procfs (rw)
Nov 29 18:13:17 update: started
swapon: added /dev/rz10b as swap device.
The system is coming up. Please wait...
Checking for crash dumps
Initializing paging space
Mounting Memory filesystems
Streams autopushes configured
Configuring network
hostname: muxs0et0.fif.mw.htw-dresden.de
Loading LMF licenses
Combine OSF-BASE ALS-IL-1999DEC22-16 with OSF-BASE ALS-IL-1998SEP28-1588
Combine OSF-BASE ALS-IL-1999DEC22-16 with OSF-BASE ALS-IL-1998SEP28-1588
System error logger started
Binary error logger started
Nov 29 18:13:28 muxs0et0 vmunix: SCSI logical disk 0: using ULTRIX partition info found on disk.
route daemon started
Setting kernel timezone variable
Setting the current time and date with ntpdate
Thu Nov 29 18:13:35 MET 2001
Ntpdate succeeded.
ONC portmap service started
NIS domain name set to fif
ypserv daemon started
ypbind daemon started
NIS passwd daemon started
NIS high-speed transfer daemon started
NFS mount daemon started
NFS export service started
NFS IO service started
NFS Locking:
rpc.statd started
rpc.lockd started
Mounting NFS filesystems
muxs1et0 on /app type nfs (v3, rw, udp, hard, intr)
muxs1et0 on /box type nfs (v3, rw, udp, hard, intr)
muxs1et0 on /usr/src/dist type nfs (v3, rw, udp, hard, intr)
moorea on /home/studiosi type nfs (v3, rw, udp, hard, intr, wsize=8192, rsize=8192)
muxs2et0 on /home/extern type nfs (v3, rw, udp, hard, intr)
moorea on /usr/src/local type nfs (v3, rw, udp, hard, intr)
Preserving editor files
security configuration set to default (BASE).
Successful SIA initialization
Clearing temporary files
Unlocking ptys
SMTP Mail Service started.
Network Time Service started
Environmental Monitoring Subsystem Configured.
Using snmp service entry port 161.
Extensible SNMP master agent started
Base O/S sub-agent started
Server System sub-agent started
Server Management sub-agent started
Compaq Management sub-agent started
Insight Manager Agent started
Performance Manager metrics server for Digital UNIX (pmgrd) started.
Environmental Monitoring Daemon started.
AdvFS daemon (advfsd) started.
Internet services provided.
Cron service started
SuperLAT. Copyright 1994 Meridian Technology Corp. All rights reserved.
LAT started.
Printer service started
Accounting Subsystem Started
accton: uid/gid not adm
ADSTAR Distributed Storage Manager - Client Scheduler
Starting client scheduler - /usr/opt/adsm/dsmc, pid [830]
A FlexLM license daemon is now running
( Use lmshutdown to stop it )
A MSC license daemon is now running
( Use lmshutdown to stop it )
The system is ready.
Digital UNIX Version V4.0 (muxs0et0.fif.mw.htw-dresden.de) console
login:
Received on Fri Dec 14 2001 - 08:40:39 NZDT