Hi,
I have a DS20 running Tru64 Unix version 4.0F patch level 5 which is
connected to a brocade switch via a KGPSA-C. We also have some HP systems
and LTO tapedrives in a Storagetek L700 silo connected to the same Brocade.
The LTO drives are directly attached to the Brocade switch.
In addition we have some DLT7000 in the same silo which are connected to the
same Brocade via a Crossroads bridge. The Crossroads and the DLT7000 are
visible on all HP systems and the Compaq DS20.
The DS20 has two KGPSA-C, one is connected to the Disk SAN and the other to
the Tape SAN.
My problems is that the LTO drives are visible on the HP systems BUT are not
to the DS20.
Has anybody ever had a similar config, ie Compaq Tru64 system connected to a
tapedrive via a Brocade switch ??
Do I need any patches, etc???
Upgrade to a higher version of Tru64 is not really an option as the system
needs to be at this version.
Any help/suggestions would be welcome. I have included the system configs
and the "wwidmgr show" below if these help.
Cheers,
Hardial Lakhpuri
Vodafone Ltd UK
Info:
2048 Meg of system memory
probing hose 1, PCI
probing PCI-to-PCI bridge, bus 2
bus 0, slot 7 -- pka -- NCR 53C895
bus 2, slot 4 -- eia -- DE602-AA
bus 2, slot 5 -- eib -- DE602-AA
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
bus 0, slot 5, function 1 -- dqa -- Cypress 82C693 IDE
bus 0, slot 5, function 2 -- dqb -- Cypress 82C693 IDE
bus 0, slot 6, function 0 -- pkb -- Adaptec AIC-7895
bus 0, slot 6, function 1 -- pkc -- Adaptec AIC-7895
bus 0, slot 7 -- pga -- KGPSA-C
bus 0, slot 8 -- pgb -- KGPSA-C
bus 0, slot 9 -- pkd -- QLogic ISP10x0
P00>>>wwidmgr -show adapters
item adapter WWN Cur. Topo Next Topo
[ 0] pga0.0.0.7.0 2000-0000-c927-9b0a FABRIC FABRIC
[ 1] pgb0.0.0.8.0 2000-0000-c927-9ad1 FABRIC FABRIC
[9999] All of the above.
P00>>>show config
COMPAQ AlphaServer DS20E 666 MHz
SRM Console: V6.0-8
PALcode: OpenVMS PALcode V1.92-73, Tru64 UNIX PALcode V1.87-69
Processors
CPU 0 Alpha EV67 pass 2.6 666 MHz SROM Revision: V1.13.44
Bcache size: 8 MB
CPU 1 Alpha EV67 pass 2.6 666 MHz SROM Revision: V1.13.44
Bcache size: 8 MB
Core Logic
Cchip DECchip 21272-CA Rev 2.1
Dchip DECchip 21272-DA Rev 2.0
Pchip 0 DECchip 21272-EA Rev 2.2
Pchip 1 DECchip 21272-EA Rev 2.2
TIG Rev 4.22
Arbiter Rev 2.16 (0x1)
MEMORY
Array # Size Base Addr
------- ---------- ---------
0 1024 MB 000000000
1 1024 MB 040000000
Total Bad Pages = 0
Total Good Memory = 2048 MBytes
PCI Hose 00
Bus 00 Slot 05/0: Cypress 82C693
Bridge to Bus 1,
ISA
Bus 00 Slot 05/1: Cypress 82C693 IDE
dqa.0.0.105.0
dqa0.0.0.105.0 CD-224E
Bus 00 Slot 05/2: Cypress 82C693 IDE
dqb.0.1.205.0
Bus 00 Slot 05/3: Cypress 82C693 USB
Bus 00 Slot 06/0: Adaptec AIC-7895
pkb0.7.0.6.0 SCSI Bus ID 7
Bus 00 Slot 06/1: Adaptec AIC-7895
pkc0.7.0.106.0 SCSI Bus ID 7
Bus 00 Slot 07: KGPSA-C
pga0.0.0.7.0 WWN
2000-0000-c927-9
dga1.1001.0.7.0 HSG80
dga21089.1.0.7.0 HSG80
Bus 00 Slot 08: KGPSA-C
pgb0.0.0.8.0 WWN
2000-0000-c927-9
jgb19816.13.0.8.0 STK L700
mgb13445.16.0.8.0 IBM ULTRIUM-TD1
mgb13959.15.0.8.0 IBM ULTRIUM-TD1
mgb32710.13.0.8.0 QUANTUM DLT7000
mgb4003.13.0.8.0 QUANTUM DLT7000
mgb6119.14.0.8.0 IBM ULTRIUM-TD1
Bus 00 Slot 09: QLogic ISP10x0
pkd0.7.0.9.0 SCSI Bus ID 7
mkd600.6.0.9.0 COMPAQ SDT-9000
PCI Hose 01
Bus 00 Slot 07: NCR 53C895
pka0.7.0.7.1 SCSI Bus ID 7
dka0.0.0.7.1 COMPAQ BF01863644
dka100.1.0.7.1 COMPAQ BF01863644
dka200.2.0.7.1 COMPAQ BF01863644
dka300.3.0.7.1 COMPAQ BF01863644
Bus 00 Slot 08: DEGPA-SA
Bus 00 Slot 09: DECchip 21154-AA
Bridge to Bus 2,
PCI
Bus 02 Slot 04: DE602-AA
eia0.0.0.2004.1 00-02-A5-C8-86-4A
Bus 02 Slot 05: DE602-AA
eib0.0.0.2005.1 00-02-A5-C8-86-4B
ISA
Slot Device Name Type Enabled BaseAddr IRQ DMA
0
0 MOUSE Embedded Yes 60 12
1 KBD Embedded Yes 60 1
2 COM1 Embedded Yes 3f8 4
3 COM2 Embedded Yes 2f8 3
4 LPT1 Embedded Yes 3bc 7
5 FLOPPY Embedded Yes 3f0 6 2
P00>>>
Received on Fri Feb 01 2002 - 09:50:33 NZDT