Hello,
Many thanks to the following folks:
Dr. Thomas.Blinn
Olle Erikson
Joe Fletcher
Samier Kesou
I have to differents problems:
>when I reboot the station I have this message:
>
>
>cam_logger: CAM_ERROR packet
>cam_logger: bus 0 target 1 lun 0
>ss_perform_timeout
>timeout on request on the bus, scheduled bus reset
>Active CCB at time of error
>
>I must do an electric halt of the station and then
>
>>> boot
>
>and the boot is ok
For this problem I have no solution.
I have made tests with hard conposent (cable, terminator..)
I have change the value of the variable boot_reset, boot_reset=ON
But no effect...
I have also ask to the hot-line of digital, and I have no more solution...
Perhaps, with an update of my system?
Any way, this message are no effect on the activity of my station...
the second problem have a solution.
>an error on scsi 2 target 2
>
>rz18 at scsi2 target 2 lun 0 (LID=5) (FUJITSU M2949Q-512 0155) (Wide16)
>
>I have unmount one of the partition of this disk because the system crashed
>sometimes when trying to access to this partition.
>
>but the second partition seems to be seek too....
>
>See the result of the uerf command after my text.
>
>my questions are:
>
>1 - What means the error reported in the event log?
>Why I can do to restore correctly the files systems on rz18? It is possible, or
>my disk is dead? I don't want to restore data, I have good backup.
I disconnect this disk. And now I have no more message of trouble on my system.
This disk is dead !
Josiane Tack
---------------------------------------------------------------------
Josiane Tack
ISTEEM - CNRS
E-Mail: Josiane.Tack_at_dstu.univ-montp2.fr
--------------------------------------------------------------------
Received on Wed Feb 27 2002 - 11:30:16 NZDT