Please,
Can you remove gcowie_at_acxiom.co.uk from your distribution list
please. He no longer works for this company.
Dave Welsh
NT Systems Administrator
Phone: +44 (0)191 525 7331
Fax: +44 (0)191 525 7007
E-Mail: Dave.Welsh_at_Acxiom.com
-----Original Message-----
From: Welsh Dave - dwelsh
Sent: 18 March 2002 11:15
To: Welsh Dave - dwelsh
Subject: Notification: Inbound Mail Failure
The following recipients did not receive the attached mail. A NDR was not
sent to the originator for the following recipients for one of the following
reasons:
* The Delivery Status Notification options did not request failure
notification, or requested no notification.
* The message was of precedence bulk.
NDR reasons are listed with each recipient, along with the notification
requested for that recipient,
or the precedence.
<GCOWIE_at_acxiom.co.uk> GCOWIE_at_acxiom.co.uk
MSEXCH:IMS:Acxiom Corporation:UK:SRVLON20 0 (000C05A6) Unknown
Recipient
Precedence: bulk
The message that caused this notification was:
<<LSM root mirror in v5.1>>
The information contained in this communication is
confidential, is intended only for the use of the recipient
named above, and may be legally privileged. If the reader
of this message is not the intended recipient, you are
hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited.
If you have received this communication in error, please
re-send this communication to the sender and delete the
original message or any copy of it from your computer
system.
attached mail follows:
Hello managers
I am trying to re-mirror a failed root disk after replacement and I
am having some problems.I needed some help in this regard
I have 4GB disk (dsk0a / and dsk0b swap) mirrored to a bigger disk (18 GB)
(dsk10a / and dsk10b swap).
The other partitions on the bigger disk (dsk10g and dsk10h) are also
mirrored
to dsk2c and dsk3c respectively.
dsk0a ---> dsk10a
dsk0b ---> dsk10b
dsk2c ---> dsk10g
dsk3c ---> dsk10h
Last week my dsk0 failed and I replaced it with the fresh one,
LSM worked fine and it disassosiated all the dsk0 related plexes (rootvol-01
and swapvol-01)
I removed both rootvol-01 and swapvol-01 and underlining subdisks.
Now when I try to remirror the rootdisk using the following command
# volrootmir dsk0 (As I want only root and swap) it says
dsk0h is not large enough.
But I am not asking it to mirror dsk0h (Only dsk0a and dsk0b).
What might be the problem?
Any ideas
Thanx
Balaji./
Received on Mon Mar 18 2002 - 11:49:12 NZST