Hi again!
Well...no doubt, the drive thinks its in read-only mode, but I dont know
why....C-programs, vdump, dd, tar etc. all say's the same....read only.
Tried with different media's, alle write-enabled, nothing helps. There is no
read-only-button on the drive.
For more info, here is the mt status:
DEVIOGET ELEMENT CONTENTS
---------------- --------
category DEV_TAPE
bus DEV_SCSI
interface SCSI
device SDX-300C
adpt_num 0
nexus_num 14
bus_num 0
ctlr_num 2
slave_num 2
dev_name tz
unit_num 2
soft_count 0
hard_count 1
stat 0x9
DEV_BOM DEV_WRTLCK
category_stat 0x0
DEV_116000_BPI
---------------- --------
mt_type MT_ISSCSI
mt_dsreg 0x9
DEV_BOM DEV_WRTLCK
mt_erreg 0x8 Blank media encountered.
mt_resid 1
mt_fileno 0
mt_blkno 0
DEV_EEI_STATUS
version 0x2
status 0x3200 Device inoperable (needs initialize)
flags 0x1000007
CAM_STATUS SCSI_STATUS SCSI_SENSE CAM_DATA
cam_status 0x4 CCB request completed with an err
scsi_status 0x2 SCSI_STAT_CHECK_CONDITION
scsi_sense_data (hex)
f0 0 8 0 0 0 1 14
0 0 0 0 0 0 0 0
22 0 0 0 0 0 1 83
ad 50 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0
ASC/ASQ = 0/0 NO Additional Sense Information
Thanx in advance for all the replys so fare, Ill make an summary when (if?)
its all working.
Lots of greetings
Danny Petterson
Dimension A/S
Denmark
> -----Oprindelig meddelelse-----
> Fra: Danny Petterson
> Sendt: 10. april 2002 11:35
> Til: tru64-unix-managers_at_ornl.gov
> Emne: Tru64 5.1/AIT-tape problem
>
> Hi Managers!
> This is with out a doubt an easy one......my AIT-drive has stopped
> working.....an example:
> #mt offline
> #mt online
> #mt rewind
> # vdump 0u /usr
> vdump: can't open dev </dev/tape/tape0_d1>; [13] Permission denied
> Whats wrong here?
>
>
>
>
>
> <Med venlig hilsen>
>
> Danny Petterson Dimension A/S
> System Konsulent danny.petterson_at_dmsn.dk
> Mobil: +45 29486827 Hovednummer: +45 87933600
>
> </Med venlig hilsen>
>
>
Received on Thu Apr 11 2002 - 13:26:58 NZST