Hello
I administrate a DU 5.1 that I have not installed. I just know that during
the installation disk1 has been mirrored by disk2 with these commands :
volencap dsk1
volreconfig 0
creation of partitions in dsk1 and dsk2 (see below the organisation)
volrootmir -a dsk2
The partition has not been set properly. The partition dsk1d (which
is not used) should be changed. Only dsk1a dsk1b dsk1e dsk1f are used
today.
My question :
If I do a disklabel on dsk1 and dsk2 to change dsk1d and dsk2d in the same
way, will the mirror still work ?
Thanks a lot
V. Thevenin
=============================
Organisation of dsk1 and fsk2
dsk1 :
8 partitions:
# size offset fstype
a: 262144 0 AdvFS
b: 5238418 262144 LSMnoprv
c: 35565080 0 unused
d: 11680264 524288 unused
e: 11680264 12204552 AdvFS
f: 11676168 23884816 AdvFS
g: 4249111 5500562 LSMnoprv
h: 4096 35560984 LSMsimp
dsk2 :
8 partitions:
# size offset fstype
a: 262144 0 AdvFS
b: 5238418 262144 LSMnoprv
c: 35565080 0 unused
d: 11680264 524288 unused
e: 11680264 12204552 unused
f: 11676168 23884816 unused
g: 4249111 5500562 LSMnoprv
h: 4096 35560984 LSMsimp
Received on Mon Jul 08 2002 - 10:56:27 NZST