Collect skipping non-SCSI disks

From: Raymond <Raymond_at_ptcpi.com>
Date: Thu, 05 Sep 2002 10:08:52 +0700

Hello,
I am using collect to gather system performance data on my DS20 running
Tru64 V5.0, but only cdrom0 and dsk2 are recorded. Does any body know why
collect skip non-SCSI disk? Is there any solution for this kind of device?

Thanks for any help.

Here is devices listed on my system:

# hwmgr -view devices
 HWID: Device Name Mfg Model Location
 
----------------------------------------------------------------------------

--
    4: /dev/kevm
   40: /dev/disk/floppy0c            3.5in floppy     fdi0-unit-0
   64: /dev/cport/scp0               SWXCR            xcr0
   65: /dev/disk/dsk0c               SWXCR            ctlr-0-unit-0
   66: /dev/disk/dsk1c               SWXCR            ctlr-0-unit-1
   67: /dev/disk/dsk2c      COMPAQ   BD0096349A       bus-0-targ-0-lun-0
   68: /dev/disk/cdrom0c    COMPAQ   CD-224E          bus-1-targ-0-lun-0
   69: /dev/ntape/tape0     DEC      TZ89     (C) DEC bus-0-targ-5-lun-0
and these are collect output
# collect -sd -p collect_init_at_18-Jul-00:05:01.cgz | more
#### RECORD    1 (1026925561:71) (Thu Jul 18 00:06:01 2002) ####
# DISK Statistics
#DSK     NAME  B/T/L   R/S RKB/S  W/S WKB/S   AVS   AVW  ACTQ   WTQ  %BSY
   0     dsk2  0/0/0     0     0    0     6 29.84  0.00  0.02  0.00  0.47
   1   cdrom0  1/0/0     0     0    0     0  0.00  0.00  0.00  0.00  0.00
#### RECORD    2 (1026925621:0) (Thu Jul 18 00:07:01 2002) ####
# DISK Statistics
#DSK     NAME  B/T/L   R/S RKB/S  W/S WKB/S   AVS   AVW  ACTQ   WTQ  %BSY
   0     dsk2  0/0/0     0     0    0     3 26.32  0.00  0.01  0.00  0.28
   1   cdrom0  1/0/0     0     0    0     0  0.00  0.00  0.00  0.00  0.00

Received on Thu Sep 05 2002 - 03:10:23 NZST