Hi admins,
I have a Compaq AlphaServer GS60E 6/700. with Compaq Tru64 UNIX V5.1 (Rev.
732) with patch kit 5. I have 4 KGPSA-CA : Driver Rev 1.25a : F/W Rev
3.02A1(1.11) hbas.
2 of them are connected to SAN the others are not connected. My problem is
I can not see disks which were being used by this system before. I have
installed the OS 5.1 today.( Fresh installation). Before the disks can be
seen. What can be the reason .?
Before :
==============================
Digital UNIX V4.0F (Rev. 1229);
scu show edt
CAM Equipment Device Table (EDT) Information:
Device: BD0096349A Bus: 0, Target: 0, Lun: 0, Type: Direct Access
Device: BD018122C0 Bus: 0, Target: 1, Lun: 0, Type: Direct Access
Device: BD0186349B Bus: 0, Target: 2, Lun: 0, Type: Direct Access
Device: TZ89 Bus: 0, Target: 4, Lun: 0, Type: Sequential Access
Device: RRD47 Bus: 1, Target: 4, Lun: 0, Type: Read-Only Direct
Access
Device: BB00913466 Bus: 2, Target: 0, Lun: 0, Type: Direct Access
Device: BD0186349B Bus: 2, Target: 1, Lun: 0, Type: Direct Access
Device: BD0186349B Bus: 2, Target: 2, Lun: 0, Type: Direct Access
Device: BD0186349B Bus: 2, Target: 3, Lun: 0, Type: Direct Access
Device: BD0096349A Bus: 2, Target: 4, Lun: 0, Type: Direct Access
Device: BD0186349B Bus: 2, Target: 5, Lun: 0, Type: Direct Access
Device: KGPSA-CA Bus: 16, Target: 6, Lun: 0, Type: Processor
Device: KGPSA-CA Bus: 16, Target: 7, Lun: 0, Type: Processor
Device: KGPSA-CA Bus: 16, Target: 7, Lun: 7, Type: Processor
Device: KGPSA-CA Bus: 17, Target: 6, Lun: 0, Type: Processor
Device: KGPSA-CA Bus: 17, Target: 7, Lun: 0, Type: Processor
Device: KGPSA-CA Bus: 17, Target: 7, Lun: 7, Type: Processor
before...
Current attribute values for the emx subsystem:
emx:
Module_Config_Name = emx
Subsystem_Description = KGPSA FC adapter driver
CMA_Option =
Driver_Version = 1.29
Max_Instances_Supported = 512
Num_Attached = 4
major_number = 77
Enable_Polled_Operation = 1
Check_Polled_Period = 5
Poll_Period_100us = 10
Go_Polled_Count = 10000
Show_FCPID_Warnings = 1
Give_HBAs_FCPIDs = 1
Coalesce_Count = 5
Coalesce_ms_Delay = 1
NPort_Max_IOs = 256
NPort_Min_IOs = 20
NPort_IORamp_Delay = 1
NPort_IORamp_Percent = 10
Now After Installation.
==================================================
/var/adm/messages/
Jan 17 14:34:54 ccb6 vmunix: Compaq Tru64 UNIX V5.1 (Rev. 732); Fri Jan 17
14:31:07 EET 2003
Jan 17 14:34:54 ccb6 vmunix: physical memory = 4096.00 megabytes.
Jan 17 14:34:54 ccb6 vmunix: available memory = 4004.34 megabytes.
Jan 17 14:34:54 ccb6 vmunix: using 15677 buffers containing 122.47
megabytes of memory
Jan 17 14:34:54 ccb6 vmunix: Master cpu at slot 0
Jan 17 14:34:54 ccb6 vmunix: Starting secondary cpu 1
Jan 17 14:34:54 ccb6 vmunix: Starting secondary cpu 2
Jan 17 14:34:54 ccb6 vmunix: Starting secondary cpu 3
Jan 17 14:34:54 ccb6 vmunix: Firmware revision: 5.8-2
Jan 17 14:34:54 ccb6 vmunix: PALcode: UNIX version 1.75-102
Jan 17 14:34:54 ccb6 vmunix: Compaq AlphaServer GS60E 6/700
Jan 17 14:34:55 ccb6 vmunix: KGPSA-CA : Driver Rev 2.02 : F/W Rev
3.02A1(1.11) : wwn 1000-0000-c922-5a6a
Jan 17 14:34:55 ccb6 vmunix: emx0: emx_linkup_timedout: link up timeout has
expired
Jan 17 14:34:55 ccb6 vmunix: scsi0 at emx0 slot 0 rad 0
Jan 17 14:34:55 ccb6 vmunix: emx2 at pci0 slot 10
Jan 17 14:34:55 ccb6 vmunix: KGPSA-CA : Driver Rev 2.02 : F/W Rev
3.02A1(1.11) : wwn 1000-0000-c922-559d
Jan 17 14:34:55 ccb6 vmunix: scsi2 at emx2 slot 0 rad 0
Jan 17 14:34:55 ccb6 vmunix: emx3 at pci1 slot 3
Jan 17 14:34:55 ccb6 vmunix: KGPSA-CA : Driver Rev 2.02 : F/W Rev
3.02A1(1.11) : wwn 1000-0000-c922-5a84
Jan 17 14:34:56 ccb6 vmunix: emx3: emx_linkup_timedout: link up timeout has
expired
Jan 17 14:34:56 ccb6 vmunix: scsi4 at emx3 slot 0 rad 0
Jan 17 14:34:56 ccb6 vmunix: emx4 at pci1 slot 10
Jan 17 14:34:56 ccb6 vmunix: KGPSA-CA : Driver Rev 2.02 : F/W Rev
3.02A1(1.11) : wwn 1000-0000-c922-589c
Jan 17 14:34:56 ccb6 vmunix: scsi6 at emx4 slot 0 rad 0
===========================================================================================
The available adapter instances are:
emx0 emx2 emx3 emx4
Now issuing commands to : "emx2"
Select Option (against "emx2"):
1. View adapter's current Topology
2. View adapter's Target Id Mappings
3. Change Target ID Mappings
d. Display Attached Adapters
a. Change targeted adapter
x. Exit
>>1
emx2 state information:
Link : connection is UP
Point to Point
Fabric attached
FC DID 0x011400
Link is SCSI bus 2 (e.g. scsi2)
SCSI target id -1
portname is 1000-0000-C922-559D
nodename is 2000-0000-C922-559D
N_Port at FC DID 0x011000 - SCSI tgt id -2 :
portname 1000-0000-C922-58AA
nodename 2000-0000-C922-58AA
Present, Logged in, FCP Initiator, FCP Target, FCP Logged in,
N_Port at FC DID 0x011200 - SCSI tgt id -2 :
portname 1000-0000-C922-5AC6
nodename 2000-0000-C922-5AC6
Present, Logged in, FCP Initiator, FCP Target, FCP Logged in,
N_Port at FC DID 0x011300 - SCSI tgt id 3 :
portname 5005-0763-00CA-0E77
nodename 5005-0763-00C0-0E77
Present, Logged in, FCP Target, FCP Logged in,
N_Port at FC DID 0x011500 - SCSI tgt id 4 :
portname 5005-0763-00C6-0F0E
nodename 5005-0763-00C0-0F0E
Present, Logged in, FCP Target, FCP Logged in,
N_Port at FC DID 0x011600 - SCSI tgt id 1 :
portname 5005-0763-00C2-0E77
nodename 5005-0763-00C0-0E77
Present, Logged in, FCP Target, FCP Logged in,
N_Port at FC DID 0x011800 - SCSI tgt id 0 :
portname 5005-0763-00C1-0F0E
nodename 5005-0763-00C0-0F0E
Present, Logged in, FCP Target, FCP Logged in,
N_Port at FC DID 0x011900 - SCSI tgt id 2 :
portname 5005-0763-00CF-0F0E
nodename 5005-0763-00C0-0F0E
Present, Logged in, FCP Target, FCP Logged in,
N_Port at FC DID 0xfffffc - SCSI tgt id -1 :
portname 20FC-0060-6910-5028
nodename 1000-0060-6910-5028
Present, Logged in, Directory Server,
N_Port at FC DID 0xfffffe - SCSI tgt id -1 :
portname 2004-0060-6910-5028
nodename 1000-0060-6910-5028
Present, Logged in, F_PORT,
=====================
# scu show edt
CAM Equipment Device Table (EDT) Information:
Bus/Target/Lun Device Type ANSI Vendor ID Product ID Revision
N/W
-------------- ----------- ------ --------- ---------------- --------
---
1 4 0 Sequential SCSI-2 DEC TZ89 (C) DEC 2561
W
3 4 0 CD-ROM SCSI-2 DEC RRD47 (C) DEC 1206
N
5 2 0 Direct SCSI-2 COMPAQ BD0186349B 3B0A
W
5 3 0 Direct SCSI-2 COMPAQ BD0186349B 3B0A
W
5 4 0 Direct SCSI-2 COMPAQ BD0096349A 3B0A
W
5 5 0 Direct SCSI-2 COMPAQ BD0186349B 3B0A
W
=============================
# hwmgr -view dev
HWID: Device Name Mfg Model Location
------------------------------------------------------------------------------
3: scp (unknown) (unknown)
4: /dev/kevm
34: /dev/disk/floppy0c 3.5in floppy fdi0-unit-0
75: /dev/disk/cdrom0c DEC RRD47 (C) DEC bus-3-targ-4-lun-0
76: /dev/disk/dsk0c COMPAQ BD0186349B bus-5-targ-2-lun-0
77: /dev/disk/dsk1c COMPAQ BD0186349B bus-5-targ-3-lun-0
78: /dev/disk/dsk2c COMPAQ BD0096349A bus-5-targ-4-lun-0
79: /dev/disk/dsk3c COMPAQ BD0186349B bus-5-targ-5-lun-0
80: /dev/ntape/tape0 DEC TZ89 (C) DEC bus-1-targ-4-lun-0
===================
Thanks,
Hakan.
http://www.telsim.com.tr
--------------------------------------
Bu e-posta sadece yukarida isimleri belirtilen kisiler arasinda ozel
haberlesme amacini tasimaktadir. Size yanlislikla ulasmissa lutfen mesaji
geri gonderiniz ve sisteminizden siliniz.Telsim Mobil Telekomunikasyon
Hizmetleri A.S. bu mesajin icerigi ile ilgili olarak hic bir hukuksal
sorumlulugu kabul etmez.
This e-mail communication is intended for the private use of the persons
named above. If you received this message in error, please immediately
notify the sender and delete it from your system.Telsim Mobil
Telekomunikasyon Hizmetleri A.S. does not accept legal responsibility for
the contents of this message.
--------------------------------------
Received on Fri Jan 17 2003 - 15:59:07 NZDT