Hi guys,
I have 2 AlphaServers ES45 with the last firmware installed, each Alpha has
1
KZPBA-BC; 1 RA3000 with just 1 shelf, 2 HSZ22
controllers (11xd), 2 host I/O.
On Wednesday, I was working fine with one Alphaserver connected to RA3000,
using 1 BN38C-05 plugged in to HOST IN of Host I/O 1,
and 1 BN37A-01 connected from HOST IN's Host I/O 1 to HOST OUT's Host I/O
0
Today, I changed the cabling with 1 SCSI HUB DWZZH-03, and I am using the
following guides for SCSI cabling:
<
ftp://ftp.compaq.com/pub/products/storageworks/raidstorage/RA3000cable.pdf>
(last page) and X:\STORAGE\SCSI\CONTROLLERS\DEC\HSZ22\host.html (where X is
your CDROM drive) from Prosic CD. I have all kind of SCSI cables.
Both KZPBA-CB are internally terminated.
Those are the SCSI ID for each controller:
Controller 1: SCSI ID 7
Controller 2: SCSI ID 6
KZPBA-CB on Alphaserver 1: SCSI ID 3
KZPBA-CB on Alphaserver 2: SCSI ID 4
The problem is that when I initialize the system and it makes the disk
testing, I receive this error : File open failed for dskb0.0.
0.1.3, and this is the complete error log (with "more el" SRM command)
device dkb0.0.0.1.3 (HSZ22) found on pkb0.0.0.1.3
device dkb1.0.0.1.3 (HSZ22) found on pkb0.0.0.1.3
device dkb2.0.0.1.3 (HSZ22) found on pkb0.0.0.1.3
device dkb3.0.0.1.3 (HSZ22) found on pkb0.0.0.1.3
device dkb4.0.0.1.3 (HSZ22) found on pkb0.0.0.1.3
device dkb5.0.0.1.3 (HSZ22) found on pkb0.0.0.1.3
sense key = 'Unit Attention' (29|00) from dkb0.0.0.1.3
sense key = 'Hardware Error' (40|f1) from dkb0.0.0.1.3
failed to send command to pkb0.0.0.1.3
device dkb0.0.0.1.3 (HSZ22) lost on pkb0.0.0.1.3
device dkb1.0.0.1.3 (HSZ22) lost on pkb0.0.0.1.3
device dkb2.0.0.1.3 (HSZ22) lost on pkb0.0.0.1.3
device dkb3.0.0.1.3 (HSZ22) lost on pkb0.0.0.1.3
device dkb4.0.0.1.3 (HSZ22) lost on pkb0.0.0.1.3
device dkb5.0.0.1.3 (HSZ22) lost on pkb0.0.0.1.3
file open failed for dkb0.0.0.1.3
device dkb0.0.0.1.3 (HSZ22) found on pkb0.0.0.1.3
device dkb1.0.0.1.3 (HSZ22) found on pkb0.0.0.1.3
device dkb2.0.0.1.3 (HSZ22) found on pkb0.0.0.1.3
device dkb3.0.0.1.3 (HSZ22) found on pkb0.0.0.1.3
device dkb4.0.0.1.3 (HSZ22) found on pkb0.0.0.1.3
device dkb5.0.0.1.3 (HSZ22) found on pkb0.0.0.1.3
Thank's for your help
Regards
Steven Muñoz Rodríguez
HP Software and Cluster, DB & Microsoft Business Solutions Support
Servicios / Soporte de Software
Received on Tue May 06 2003 - 19:48:58 NZST