adding disk with hsz80/es-40 and 5.1a

From: Jeff Foster <jfoster_at_calmail.berkeley.edu>
Date: Mon, 26 Jan 2004 11:36:49 -0800

hi ll,

disk not showng up after scsi scan.

I have added a mirror set to an HSZ80 controller attached to
an es-40 running 5.1A

I added the disks using runcfg, then created a mirror and init it.
hsz80 sees the mirror.

on the es-40 I ran hwmgr -show scsi
and -scan, but I don't see the new disk.
 do I need to reboot?=20

# hwmgr -show scsi

        SCSI DEVICE DEVICE DRIVER NUM DEVICE FIRST=20
 HWID: DEVICEID HOSTNAME TYPE SUBTYPE OWNER PATH FILE VALID =
PATH
-------------------------------------------------------------------------=

   54: 0 cads disk none 2 1 dsk0 [2/1/0] =
 =20
   55: 1 cads disk none 0 1 scp0 [2/1/1] =
 =20
   56: 2 cads disk none 2 1 dsk1 [2/1/2] =
 =20
   57: 3 cads disk none 2 1 dsk2 [2/1/3] =
 =20
   58: 4 cads disk none 2 1 dsk3 [2/1/4] =
 =20
   59: 5 cads cdrom none 0 1 cdrom0 [3/0/0] =
 =20
# hwmgr -scan scsi
hwmgr: Scan request successfully initiated
# hwmgr -show scsi

        SCSI DEVICE DEVICE DRIVER NUM DEVICE FIRST=20
 HWID: DEVICEID HOSTNAME TYPE SUBTYPE OWNER PATH FILE VALID =
PATH
-------------------------------------------------------------------------=


   54: 0 cads disk none 2 1 dsk0 [2/1/0] =
 =20
   55: 1 cads disk none 0 1 scp0 [2/1/1] =
 =20
   56: 2 cads disk none 2 1 dsk1 [2/1/2] =
 =20
   57: 3 cads disk none 2 1 dsk2 [2/1/3] =
 =20
   58: 4 cads disk none 2 1 dsk3 [2/1/4] =
 =20
   59: 5 cads cdrom none 0 1 cdrom0 [3/0/0] =
 =20
#=20



thanks for any suggestions

Jeff

---
Jeff Foster
sda unix ccs uc Berkeley
642-8552

Received on Mon Jan 26 2004 - 19:38:24 NZDT