> Dear managers,
>
> I have to modify the cluster (2XES40) from single path to dual path,
> *CURRENT CONFIGURATION
>
> -tru64 V5.1A
>
> -trucluster, configured and running
>
> -MSA8000 with (HSG80 controller,3X4354 model disk enclosure Dual-bus)
>
> -cluster interconnect is memory channel
>
> -One HBA controller on each member
>
> -One F.C switch
>
> -boot disks(for members) and cluster disks on MSA8000
>
> *NEW CONFIGURATION (multiple-bus failover mode)
>
> -MSA8000 with redundant HSG80, 6X 4314 model disk enclosure single
bus
>
> -additional F.C switch
>
> -2XHBA controller on each member
>
> Question is:
>
> Can I modify the cluster system configuration to the new configuration
> without rebuilding the cluster and reconfiguring the disks on MSA8000?
>
> I need to keep the application disks, the members booting disk and the
> cluster disk as they are.
>
>
>
> Please advise , your comments are highly apreciated.
>
>
>
> Kindest Regards
>
> mounzer noaman
>
>
Received on Thu Feb 12 2004 - 10:57:50 NZDT
This archive was generated by hypermail 2.4.0
: Wed Nov 08 2023 - 11:53:44 NZDT