Summary - Console Access to HP GS80
> Thanks to everyone who helped me on this one. I now have 3 ways to connect to the console of our GS80s.
> In the past I have used ConsoleWorks running on a PC.
>
> I can now telnet directly into the DEC terminal server which is connected to the serial port or I can connect directly to the serial port.
>
> One thing I found out is that Digital 9pin to rj45 adapters are apparently different than other types - they look almost exactly alike but only the Digitals would work.
>
> Bryan
>
> -----Original Message-----
> From: Burroughs, Bryan L, NEO
> Sent: Thursday, February 19, 2004 8:49 AM
> To: 'tru64-unix-managers list'
> Subject: Console Access to HP GS80
>
> Hello everyone,
>
> I hope this is the correct list to send this question to since this is my first posting.
>
> I have a GS80 partitioned as 2 servers. Currently we access the console via ConsoleWorks running on a Windows PC. I would like to be able to use a Unix console server in place of the PC. I havan't had any luck connecting a serial console directly to the GS80s. The Unix console server is working just fine with ES40 and DS20.
>
> The PC is connected via IP to a DEC terminal server which is connected to the serial port on the server.
>
> Is there something that needs to be set at the SRM prompt. This is a critical server and can't bring the machine down anytime I wish.
>
> I haven't found much information on HP's website for this.
>
> Any help would be appreciated.
>
> thanks,
>
> Bryan Burroughs
>
Received on Fri Feb 27 2004 - 18:37:36 NZDT
This archive was generated by hypermail 2.4.0
: Wed Nov 08 2023 - 11:53:44 NZDT