Hello Manager's,
I've AS4100 with 4.0f(bl22 patch) connected to an
HSZ70 (FW:V77Z-2) storage. And, i have 18gb disks on
this. If i add lun's(units) representing individual
disks, on the host side it report's allright, i.e., as
18 gb disks.
Where as, when i try to add stripesets or raidsets, on
the host side, it doesn't report the correct size.
For ex: i've create a raidset r0 with 18gb x 6 disks,
which reports around 88gb on the controller. When, i
tried mounting this lun on my host, it shows as some
9gb disk space. Am i missing someing ??
I reconfigured the storage box, but it was of no
help. Here are some more information on the
configuration :
HSZ> show this full
Controller:
HSZ70 ZG74002118 Firmware V77Z-2, Hardware
H01
Configured for dual-redundancy with ZG80808593
In dual-redundant configuration
Device Port SCSI address 7
Time: 17-MAR-2004 13:30:18
Host port:
SCSI target(s) (1, 3, 4, 5)
Preferred target(s) (1, 3)
TRANSFER_RATE_REQUESTED = 20MHZ
Host Functionality Mode = A
Allocation class 0
Command Console LUN is target 1, lun 1
HSZ> show units
LUN Uses
--------------------------------------------------------------
D100 R0
HSZ> show r0
Name Storageset Uses
Used by
------------------------------------------------------------------------------
R0 raidset DISK10000
D100
DISK20000
DISK30000
DISK40000
DISK50000
DISK60000
Thanks,
Swamy
__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com
Received on Wed Mar 17 2004 - 09:21:23 NZDT