Hi all,
I've just rebuilt a DS10.
I have updated the f/w to 6.6, put v5.1a on with PK6.
Ds10 has a SCSI card running an external disk shelf.
I also have some threshold errors, but I think they are related to Insight Manager, so I'm not too worried about them.
I get the following error on a disk (disk5), I think, but I can access it fine. Binary error log shows no errors so I've included some info below.
Is there anything I can do to further diagnose or fix this issue?
Extract from evmget -A -t "_at_timestamp _at__at_"
10-Jun-2004 17:13:49 PSM instance 768 exited in category inetd on node woody w0
10-Jun-2004 17:13:50 cpqthresh_mib[705]: cpqthresh_mib WARNING esnmp_init.c lil
10-Jun-2004 17:13:50 cpqthresh_mib[705]: cpqthresh_mib **ERROR cpqThresholdMgm.
10-Jun-2004 17:13:50 PSM instance 357 exited in category nfsiod on node woody 9
10-Jun-2004 17:13:51 /internetServices stopped process "/usr/sbin/rcinet" on wy
10-Jun-2004 17:13:52 PSM instance 1583 created in category nfsiod on node woody
10-Jun-2004 17:13:53 sendmail[1604]: My unqualified host name (woody) unknown;y
10-Jun-2004 17:13:53 cpqthresh_mib[705]: cpqthresh_mib **ERROR esnmp_init.c lid
10-Jun-2004 17:13:53 cpqthresh_mib[705]: cpqthresh_mib **ERROR cpqThresholdMgmy
10-Jun-2004 17:13:53 syslog: Either svrSystem_mib is not running or envmon.mod.
10-Jun-2004 17:13:55 [1657]: **ERROR svrsys_fru_parse.c line 1264: FRU Table 1
10-Jun-2004 17:13:55 [1658]: Initializing the threshold structure
10-Jun-2004 17:13:55 pmgrd[1662]: catalog error:
..........
11-Jun-2004 08:29:42 vmunix: IntraServer ROM Version V2.0 (c)1998
11-Jun-2004 08:29:42 vmunix: scsi2 at itpsa0 slot 0 rad 0
11-Jun-2004 08:29:42 PSM category nfsiod created on node woody.mentec.ie
11-Jun-2004 08:29:42 PSM instance 419 created in category nfsiod on node woodye
11-Jun-2004 08:29:42 vmunix: isp0 at pci0 slot 17
11-Jun-2004 08:29:42 vmunix: isp0: QLOGIC ISP1040B/V2
11-Jun-2004 08:29:42 vmunix: isp0: Firmware revision 5.57 (loaded by console)
11-Jun-2004 08:29:42 vmunix: isp0: Fast RAM timing enabled.
11-Jun-2004 08:29:42 vmunix: cam_logger: SCSI event packet
11-Jun-2004 08:29:42 vmunix: cam_logger: bus 3 target 3 lun 0
11-Jun-2004 08:29:42 vmunix: isp_process_response_queue
11-Jun-2004 08:29:42 vmunix: Autosense failure CSEC status reported
11-Jun-2004 08:29:42 vmunix: Active CCB at time of error
11-Jun-2004 08:29:42 vmunix: cam_logger: SCSI event packet
11-Jun-2004 08:29:42 vmunix: cam_logger: bus 3 target 3 lun 4
11-Jun-2004 08:29:42 vmunix: isp_process_response_queue
11-Jun-2004 08:29:42 vmunix: Extended Sense Entries missing on the response que
11-Jun-2004 08:29:42 vmunix: Active CCB at time of error
11-Jun-2004 08:29:42 vmunix: cam_logger: SCSI event packet
11-Jun-2004 08:29:42 vmunix: cam_logger: bus 3 target 3 lun 4
11-Jun-2004 08:29:42 vmunix: isp_process_response_queue
11-Jun-2004 08:29:42 vmunix: Unexpected transport error CSEC status
11-Jun-2004 08:29:42 vmunix: Active CCB at time of error
11-Jun-2004 08:29:42 vmunix: scsi3 at isp0 slot 0 rad 0
11-Jun-2004 08:29:43 vmunix: Created FRU table binary error log packet
# hwmgr -sho scsi
SCSI DEVICE DEVICE DRIVER NUM DEVICE FIRST
HWID: DEVICEID HOSTNAME TYPE SUBTYPE OWNER PATH FILE VALID PATH
-------------------------------------------------------------------------
39: 0 woody cdrom none 0 1 (null)
40: 1 woody disk none 2 1 dsk0 [2/0/0]
41: 2 woody disk none 2 1 dsk1 [2/1/0]
42: 3 woody disk none 0 1 (null)
43: 4 woody tape none 0 1 (null)
44: 5 woody tape none 0 1 (null)
45: 6 woody cdrom none 0 1 cdrom1 [1/0/0]
46: 7 woody tape none 0 1 (null)
52: 8 woody disk none 0 1 dsk3 [2/2/0]
53: 9 woody disk none 0 1 dsk4 [3/2/0]
54: 10 woody disk none 2 1 dsk5 [3/3/0]
55: 11 woody disk none 0 1 dsk6 [3/4/0]
56: 12 woody tape none 0 1 tape3 [2/5/0]
CONFIDENTIALITY NOTICE
This email is private and confidential and may contain legally privileged information.If you are not named above as an addressee it may be unlawful for you to read, copy, distribute, disclose or otherwise use the information in this email. If you are not the intended recipient of this email please contact our systems manager.
Thank you.
Any views or opinions presented are solely those of the author and do not necessarily represent those of the company or its associated companies unless otherwise specifically stated.
Received on Fri Jun 11 2004 - 09:44:09 NZST