SUMMARY (partial): amanda mru robot control script?

From: Davis, Alan <Davis_at_tessco.com>
Date: Tue, 03 Aug 2004 10:51:26 -0400

> Thanks to Robert Dege (author of the chg-mcutil script) for his help in
> getting an mcicap entry that works for my MSL5052. I'll probably keep
> working on an MRU robot variant of the tpchanger script but this will work
> for now.
>
> This is my working mcicap entry :
>
> mc0:\
> :mc=/dev/changer/mc0:\
>
> :nd#4:ns#50:dt=tape:dn=/dev/ntape/tape0,/dev/ntape/tape1,/dev/ntape/tape2,
> /dev/ntape/tape3:tc=msl5000
>
> Note that the mcicap man page is misleading, at best, confusing the mc:
> and dn: devices.
>
> Further experimentation shows that a minimal entry is :
>
> mc0:\
> :mc=/dev/changer/mc0:tc=msl5000
>
> The number of drives, device names, number of slots are determined
> automatically.
>
>
>
>
Received on Tue Aug 03 2004 - 14:56:21 NZST

This archive was generated by hypermail 2.4.0 : Wed Nov 08 2023 - 11:53:44 NZDT