Hello Managers:
Tru64 4.0G AlphaServer 2000 and I have ran into problems
Last week we had power go down in the computer room. When power was restored I
noticed that I had a hard drive go down. It had a fault light on it. Member 1
on a raid-5 4 member set.
I put in my spare drive and the system auto rebuilt the drive.
Since it was under contract I got another drive to replace my spare.
On Sunday we had another power outage (the UPS is old 1/2 size of the computer
room) and I had a failed drive again. Same member, same raid set, same
rebuild.
Is there anything else I need to check to see why this keeps on happening?
***** Physical Device Information for xcr0 *****
Channel, Wide/ Controller
Target: Vendor: Description: Firmware: Narrow: Status:
-----------------------------------------------------------------------
<0,0> COMPAQ BB00913466 3B07 W OPT
<0,1> COMPAQ BB00913466 3B07 W OPT <-- this was
the failed drive 2 weeks in a row.
<0,2> COMPAQ BB009135B4 B017 W OPT
<0,3> COMPAQ BB00913466 3B07 W OPT
SWXCR xcr0 error counters:
RAID Array 200 Controller Family Information Utility V1.03
Copyright (c)1997,2000 by Compaq Computer Corporation, all rights reserved.
***** Controller Physical Device Error Counts for xcr0 *****
Channel, Parity Soft Hard Misc
Target: Errors: Errors: Errors: Errors:
----------------------------------------------------------------
<0,0> 0 0 0 0
<0,1> 0 0 0 0
<0,2> 0 0 0 0
<0,3> 0 0 0 0
SWXCR xcr0 controller status:
RAID Array 200 Controller Family Information Utility V1.03
Copyright (c)1997,2000 by Compaq Computer Corporation, all rights reserved.
***** Status Check Summary for xcr0 *****
FAILED DISKS FOUND: 0
DEAD LOGICAL DRIVES FOUND: 0
DEGRADED LOGICAL DRIVES FOUND: 0
STATUS FROM LAST REBUILD/PARITY CHECK ATTEMPT:
No REBUILD / PARITY CHECK in progress, last completed without error
--
Ron Bramblett
Systems Administrator
Fuller Brush Company
Received on Mon May 16 2005 - 16:02:42 NZST