Hi,
I have a HSG60 controller with mirror sets on it. I get often, several
times a day, the below error message. In this case the unit number 27 is
a disk defined on a mirror set. I do not understand what produces the
error, because the Device ID and Device Serial Number are empty.
Occasionaly I have disk errors on my trucluster, because of this.
I have just updated firmware on some of my disks, so now all my disks
have the latest firmware, if that should have made a difference.
I have also included the description of the Instance and the SCSI
Command Opcode.
Does anybody have an idea?
Regards,
Maurice
%EVL--HSG60 InT Clu>--21-SEP-2005 19:36:39-- Instance Code: 0258000A
Template: 81.(51)
Occurred on 21-SEP-2005 at 19:36:39
Power On Time: 4. Years, 274. Days, 1. Hours, 33. Minutes, 19. Seconds
Controller Model: HSG60
Serial Number: ZG01800722 Hardware Version: E11(29)
Software Version: V87L-4(BB)
Informational Report
Unit Number: 27.(001B)
Unit Software Version: 1.(01) Unit Hardware Version: 55.(37)
Retry Level: 1. Retries: 1.
Port: 255. Target: 255. LUN: 255.
SCSI Device Type: 0.(00)
Device ID: "" Device Serial Number: ""
Device Software Revision Level: ""
SCSI Command Opcode: 42.(2A)
Sense Data Qualifiers: 64.(40)
SCSI Sense Data:
Error Code: 112.(70) {current command execution}
Information field is valid
Segment: 0.(00)
Sense Key: 11.(0B) ABORTED COMMAND
ILI: 0 EOM: 0 FM: 0
Information: 021E8426
Additional Sense Length: 10.(0A)
Command-Specific Information: 00000000
ASC: 0.(00) ASCQ: 6.(06)
FRU: 0.(00) Sense-Key Specific: 000000
Instance Code: 0258000A
FMU> desc inst 0258000A
Instance Code: 0258000A Description:
This command was aborted prior to completion. The Information field of
the
Device Sense Data contains the block number of the first block in
error.
Reporting Component: 2.(02) Description:
Value Added Services
Reporting component's event number: 88.(58)
Event Threshold: 10.(0A) Classification:
SOFT. An unexpected condition detected by a controller software
component
(e.g., protocol violations, host buffer access errors, internal
inconsistencies, uninterpreted device errors, etc.) or an intentional
restart or shutdown of controller operation is indicated.
FMU> desc scsi 2a 0
SCSI Command Opcode: 42.(2A) Description:
WRITE (10 byte)
SCSI Device Type: 0.(00) Description:
Direct-Access Devices (e.g., magnetic disk).
============================================================
The information contained in this message may be privileged
and confidential and protected from disclosure. If the reader
of this message is not the intended recipient, or an employee
or agent responsible for delivering this message to the
intended recipient, you are hereby notified that any reproduction,
dissemination or distribution of this communication is strictly
prohibited. If you have received this communication in error,
please notify us immediately by replying to the message and
deleting it from your computer. Thank you. Tellabs
============================================================
Received on Wed Sep 21 2005 - 20:40:10 NZST