Johns finding answers my question.:
(why didn't I look there... ? ;-) )
# man voledit # !!!
Lanier, John skrev:
> Hello,
>
> I found the following while looking at "man voledit":
>
>
> ...
>
> /sbin/voledit [-g diskgroup] [-e pattern] [-vpsdGrf] set attribute=value...
> [name...]
>
>
> ...
>
>
> failing
> Sets (on) or clears (off) the disk failing flag. If the failing
> flag is set for a disk, the disk space is not used as free space or
> used by the hot-sparing facility.
>
>
> ...
>
>
> So the syntax looks to be as follows:
>
>
> ...
>
> dm dsk3g dsk3g simple 4096 15918532 FAILING <--
> dm dsk3h dsk3h simple 4096 15918532 FAILING <--
>
> ...
>
>
> /sbin/voledit set failing=off cluster_usrvol <--uses "dsk3g"
> /sbin/voledit set failing=off cluster_varvol <--uses "dsk3h"
>
>
> Hope this helps,
>
> --John Lanier
>
>
> -----Original Message-----
> From: tru64-unix-managers-owner_at_ornl.gov [mailto:tru64-unix-managers-owner_at_ornl.gov] On Behalf Of "Martin Rønde Andersen - mail.dk"
> Sent: Saturday, January 12, 2008 1:54 PM
> To: tru64-unix-managers_at_ornl.gov
> Subject: LSM recovering after error OK, what about FAILING in volprint ?
>
> Hello all ..
>
> I have the following problem:
>
> After this cluster have had problems in the dual HSG80 SAN , the disks are in place again.
> BUT two partitions of the one side, has a FAILING beside the definition.
> How do I et rid of the FAILING ?
>
> I assume that things are OK, looking down the list of ACTIVE plexes, but I want to get the errors away, because I fear that this is giving me problems when I want to move the rootvol, usrvol and varvol with cfs commands.
>
> Moreover, where does this come from ?
>
> I also have a datadg disk with the same fenomen.
>
> Here is the volprint output for rootdg:
>
> * volprint rootdg *
>
> ------------------------------------------------------------------------
>
> DG NAME NCONFIG NLOG MINORS GROUP-ID
> DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE
> V NAME USETYPE KSTATE STATE LENGTH READPOL PREFPLEX
> PL NAME VOLUME KSTATE STATE LENGTH LAYOUT NCOL/WID MODE
> SD NAME PLEX DISK DISKOFFS LENGTH [COL/]OFF DEVICE MODE
>
> dg rootdg default default 0 1081008785.1026.bivaclu
>
> dm dsk3b dsk3b simple 4096 2995888 -
> dm dsk3g dsk3g simple 4096 15918532 FAILING
> dm dsk3h dsk3h simple 4096 15918532 FAILING
> dm dsk24b dsk24b simple 4096 2995888 -
> dm dsk24g dsk24g simple 4096 15918532 -
> dm dsk24h dsk24h simple 4096 15918532 -
>
> v cluster_rootvol cluroot ENABLED ACTIVE 2995888 SELECT -
> pl cluster_rootvol-01 cluster_rootvol ENABLED ACTIVE 2995888 CONCAT - RW
> sd dsk24b-01 cluster_rootvol-01 dsk24b 0 2995888 0 dsk24b ENA
> pl cluster_rootvol-02 cluster_rootvol ENABLED ACTIVE 2995888 CONCAT - RW
> sd dsk3b-01 cluster_rootvol-02 dsk3b 0 2995888 0 dsk3b ENA
>
> v cluster_usrvol fsgen ENABLED ACTIVE 15918532 SELECT -
> pl cluster_usrvol-01 cluster_usrvol ENABLED ACTIVE 15918532 CONCAT - RW
> sd dsk24g-01 cluster_usrvol-01 dsk24g 0 15918532 0 dsk24g ENA
> pl cluster_usrvol-02 cluster_usrvol ENABLED ACTIVE 15918532 CONCAT - RW
> sd dsk3g-01 cluster_usrvol-02 dsk3g 0 15918532 0 dsk3g ENA
>
> v cluster_varvol fsgen ENABLED ACTIVE 15918532 SELECT -
> pl cluster_varvol-01 cluster_varvol ENABLED ACTIVE 15918532 CONCAT - RW
> sd dsk24h-01 cluster_varvol-01 dsk24h 0 15918532 0 dsk24h ENA
> pl cluster_varvol-02 cluster_varvol ENABLED ACTIVE 15918532 CONCAT - RW
>
>
>
>
> sd dsk3h-01 cluster_varvol-02 dsk3h 0 15918532 0 dsk3h ENA
>
>
>
>
>
>
Received on Sun Jan 13 2008 - 13:38:43 NZDT